Air Tanks & Regulators

This Taprite dual gauge CO2 regulator is an absolute necessity for your home or commercial... More info
Item # T742HP

This Flow Rite CO2 regulator is the perfect solution for hassle-free dispensing from your More info
Item # FC741H

This blank keg regulator mounting panel gives you complete control over your unique draft... More info
Item # REGMT7XX

Trust your draft system to the best draft beer equipment, and you can be confident in its... More info
Item # REGMT12XX

This CO2 regulator allows you to run up to three kegs from one tank, even if each keg... More info
Item # T1683ST

With this secondary CO2 regulator, you can dispense beer from up to four kegs with four... More info
Item # T1694ST

You don’t need five separate air regulators to dispense beer in your multi-keg setup.... More info
Item # T1695ST

All of the draft beer parts you need to make minor repairs to your system, in one complete... More info
Item # DRFTRPR-KIT

If you want to set up a draft dispensing system, you need a dependable CO2 tank to provide... More info
Item # 9049

This CO2 cylinder is produced from high strength aluminum alloy. Enjoy the benefits of... More info
Item # 9100

Safely and efficiently dispense Guinness with this high-strength aluminum nitrogen gas tank.... More info
Item # CYL-22CU580-A-N

This premium quality two gauge regulator tells you both the pressure going into the keg and... More info
Item # JO-62K

One gauge tells you the pressure to the keg and the other shows how much air is left in your... More info
Item # T742

Use this CO2 regulator to monitor and control the gas pressure that dispenses the beer in... More info
Item # JO-60K

Tells you the pressure to the keg so you can adjust accordingly for the type of beer you are... More info
Item # T741

Run 3 different kegs off of one tank, and set the perfect pressure for each type of beer.

Run three different kegs off of one tank, even if you require three different pressure... More info
Item # MVHH-33-KB60

If you want to dispense beer from four different kegs, you don’t need a separate CO2... More info
Item # MVHH-44-KB60

Run 5 different kegs off of one tank, and set the perfect pressure for each one with this... More info
Item # MVHH-55-KB60

Running 4 kegs off of one tank? Do the beers require different pressures?

Running 5 kegs off of one air tank? Do the beers require different pressures? This is the... More info
Item # DTR1155

This secondary regulator is used in conjunction with your primary CO2 regulator to set... More info
Item # T1661STXX

Running 2 kegs off of one air tank? This is the perfect solution to set the pressure to each... More info
Item # T1672ST

Tap two kegs at the same time using one regulator and air tank.

Tap two kegs at the same time using one regulator and air tank.

This solid brass CO2 distribution manifold is offered in models varying from two to nine... More info
Item # M-X63-2

Distribute CO2 from one air tank to two kegs with this draft beer system accessory.

Use to distribute CO2 from one air tank to 3 separate kegs.

Used to distribute from one tank to 4 separate kegs.

Used to distribute from one tank to 5 separate kegs.

Used to distribute from 1 air tank to 6 separate kegs.

This 1/4” More info
Item # C525

If you already have a CO2 regulator and want to use it on a nitrogen air tank, this is the... More info
Item # 810

If you already have a Nitrogen regulator and want to use it with a CO2 air tank, this is the... More info
Item # 806

Measures from 0-pound to 60-pound. Right hand thread.

0 – 3000 Right Hand Thread. Fits NADS, Chudnow & Norgren

0-3000 Left Hand Thread. Fits: Cornelius, DT, MicroMatic. Check to see if you have left-hand... More info
Item # X003-3000-LEFT

Replacement washers that go between your regulator and CO2 tank in your draft beer system.