KegWorks - Tools for Drinking KegWorks - Tools for Drinking

You have no items in your shopping cart.

KegWorks - ITEM # DD58GROWLER10

Growler Filling Station - 10 Faucets

Roll Over Image to Zoom

Click to View Larger

$3,999.99

Discontinued.

Offer a wide variety of beer choices with 10 taps! Need a custom configuration? Call our draft beer equipment sales department at 866.881.BEER (2337).


    Overview

    This growler filling station has 10 taps to offer a wide variety of enticing choices to your thirsty customers!

    On this unit’s outside is black wear-resistant vinyl on steel construction that’s durable and attractive at the same time. The stainless steel top has two pre-installed draft towers that each feature five draft beer faucets. It also includes a drip tray for reliably easy cleaning from the inevitable drips and spills while pouring.

    Inside, the unit features galvanized steel walls and ceilings with enough room for 10 1/6 kegs or three 1/4 or 1/2 kegs. The reinforced floor and door are made from heavy-duty stainless steel for maximum longevity. Even better, the self-closing door has a keyed lock for security and magnetic gaskets that guarantee a chill-saving seal.

    The cabinet is insulated with foamed-in-place polyurethane that provides maximum cooling efficiency and strengthens the overall construction. A lift-out heavy duty forced-air refrigeration system creates a steady flow of cold air throughout the unit’s interior using environmentally-friendly, CFC-free R134a refrigerant.

    Please note: If this configuration does not meet your needs call our draft beer equipment sales department at 866.881.BEER (2337) or e-mail your request to beer@kegworks.com.

    Features
    • Sleek, black exterior coated with wear-resistant vinyl on steel
    • Cabinet is insulated with foamed-in-place polyurethane
    • Refrigerant used is R134a, which is CFC-free
    • Galvanized steel interior
    • Top is made from heavy-duty stainless steel

     Free Expert Support

     877.636.3673

    Contact Customer Care
    Specifications
    Specs
    • External cabinet dimensions: 59”W x 37 1/4”H x 28 3/16”D
    • Depth with door open: 50 9/16
    • Net Capacity: 23.8 Cu Ft.
    • 115 volts, 7.2 amps, 1/3 HP
    • Will hold 10 to 12 sixth kegs, 3 quarter keg or 3 half kegs
    • Knock out plug on compressor housing can be removed to run CO2 line into unit from external tank
    • CO2 tank can be stored inside unit, but will take the place of at least one sixth keg
    • Unit pre-wired with 8’ long cord and plug set
    Includes
    • (1) Beverage Air DD58 Kegerator
    • (2) 5 tap T-tower with chrome plated brass faucets and 5’ beer lines with hex connectors
    • (10) US Sankey (type D) keg couplers
    • (11) 5’ air lines 5/16” diameter with screw clamps
    • (2) 5 way secondary CO2 regulator
    • (1) Double gauge two product primary CO2 regulator
    • (1) 10lb CO2 tank
    • (1) Removable drip tray
    • (1) Heavy duty stainless steel top w/rails
    • (1) Shelf for internal storage of 5# CO2 tank
    • Power cord and grounded plug are provided
    Warranty
    • Four year warranty on compressor and one year on parts direct through Beverage Air (Service Line: 1-800-684-1199). Warranty valid only in the continental United States.
    Product Manual
    Shipping & Delivery
    Additional Shipping Information
    • Ships via freight truck. Learn more
    • Refrigeration body ships separately from draft dispensing equipment
    • Ships by freight truck, express shipping unavailable
    • Curbside delivery only: Someone must be present to receive and unload product
    Related Products
    Customer Reviews
    There are no reviews for this item. Write Review
    Questions & Answers
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 1 question Browse 1 question and 1 answer
    What other items are needed to have this up and running? Co2 ect
    A shopper on Feb 18, 2016
    BEST ANSWER: This unit includes everything you need to start dispensing right away! Here is are the dispensing items included:

    (2) 5 tap T-towers with chrome plated brass faucets and 5’ beer lines with hex connectors
    (10) US Sankey (type D) keg couplers
    (11) 5’ air lines 5/16” diameter with screw clamps
    (2) 5 way secondary CO2 regulators
    (1) Double gauge two product primary CO2 regulator
    (1) 10lb CO2 tank

    Power cord and grounded plug are also provided. The refrigeration unit has a four year warranty on compressor and one year on parts direct through Beverage Air.

    Don't forget to order tap handles, too!
    Beer Tap Faucet Handle Black Knob
    Beer Tap Faucet Handle Black Knob
    KegWorks® Heavyweight Beer Faucet Tap Handle - Polished Stainless Steel
    KegWorks® Heavyweight Beer Faucet Tap Handle - Polished Stainless Steel
    Recommended Products
    ×

    About Backorders

    This item is currently out of stock but we're expecting more soon.

    For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.

    Click here for additional shipping information.