KegWorks - Tools for Drinking KegWorks - Tools for Drinking

You have no items in your shopping cart.

Disclaimer: $10 off $75+ Draft Beer Supplies - Use code DRAFTPICK at checkout. Prior sales excluded. Cannot be combined with other offers/promotions. Offer expires 8/25/2019 at 11:59pm EST.

Shop Now ×
KegWorks - ITEM # 920-2P

Bar Foot Rail Tubing - Polished Brass - 2" OD

Roll Over Image to Zoom

Click to View Larger

$39.99 - $159.99

This polished brass bar foot rail tubing will give your bar a shiny, decorative look while adding comfort for your guests.


Choose Items Below
    Overview

    Add a bar foot railing to your setup with this shiny polished brass tubing. This luxurious brass bar foot rail is available in a variety of tube sizes from 2-feet through 8-feet to fit the size of your bar.

    With its shimmering polished brass finish, this bar rail tubing is made to add long-lasting, eye-popping style to any home or commercial bar.

    To properly install this 2-inch tubing along your bar, add your chosen style of bar foot rail brackets in the same diameter. Be sure to carefully measure where each bracket will be placed before drilling into your bar, wall, or floor. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.

    To allow the bar foot rest to match the unique angles of your bar, use elbows and fittings. With end caps and flanges, you can ensure that your bar rail has a finished look and is mounted correctly in any space.

    When ordering tubing, it’s always wise to round up to the nearest foot. If your bar is not an even full foot increment, but rather has some inch increment (i.e. 6’2″, 7’2″) you will need to order up to the next foot. So if your bar is 3’2″ you will need to order a 4-foot piece of tubing, if your bar is 7’2″ you will need to order an 8-foot piece of tubing, and so on. If this is the case, you will need to cut the rail with a miter saw prior to installation.

    To connect two sections of tubing together, an internal splicing sleeve can be used. The seam between two joined pieces is then covered by placing a bracket over the joint.

    By using this brass foot rail tubing with matching components, completing a DIY bar foot rail project is easier than it sounds. Achieve a consistent look throughout your bar, with added comfort for your guests.

    Features
    • Made of polished solid brass, not plated
    • Matching components available
    • Makes your bar more comfortable for guests
    • An eye-popping style addition to any bar
    • A bracket should be used at both ends and at every 4’ increment
    • Suitable for indoor use only

    Free Expert Support

     877.636.3673

    Contact Customer Care
    Specifications
    Specs
    • Outside diameter: 2”
    • Wall thickness: .050”
    WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    Shipping & Delivery
    Additional Shipping Information
    • Expedited Shipping available. Some limitations apply.
    • International Shipping: Due to international shipping restrictions, we are unable to ship 8 foot bar rail tubing to international customers. If your project requires a longer rail, simply order 4 foot tubing sections plus splicing sleeve(s) to connect two pieces of tubing. The seam between two joined pieces can be covered by placing a bracket over the joint.
    Choose Items
    • Bar Foot Rail Tubing - Polished Brass - 2" OD - 2 Feet
      Item # 920-2P-02
      Bar Foot Rail Tubing - Polished Brass - 2" OD - 2 Feet

      In stock and ready to ship.

      $39.99

    • Bar Foot Rail Tubing - Polished Brass - 2" OD - 4 Feet
      Item # 920-2P-04
      Bar Foot Rail Tubing - Polished Brass - 2" OD - 4 Feet

      In stock and ready to ship.

      $79.99

    • Bar Foot Rail Tubing - Polished Brass - 2" OD - 6 feet
      Item # 920-2P-06
      Bar Foot Rail Tubing - Polished Brass - 2" OD - 6 feet

      In stock and ready to ship.

      $119.99

    • Bar Foot Rail Tubing - Polished Brass - 2" OD - 8 Feet
      Item # 920-2P-08
      Bar Foot Rail Tubing - Polished Brass - 2" OD - 8 Feet

      This item is on backorder & will ship when it’s available.

      $159.99

    Related Products

    Customer Reviews
    4.7 / 5.0
    9 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    7
    1
    1
    0
    0
    Quality
    4.8 / 5
    Value
    4.8 / 5
    Would you recommend this product?
    Yes! I would recommend this product. (8)
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Could be a little heavier tubing but it does the job and looks great
    April 20, 2017
    Watauga, TX, US
    Purchased
    over 2 years ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Great price and delivery but don't put staples to attach the ends it can scratch the brass
    July 25, 2018
    Wichita, KS, US
    Purchased
    1 year ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    3 / 5
    Value
    3 / 5
    Foot rail tubing
    I was very disappointed in the fact that this item had 2, very noticeable dents in it and I thought the price was a little ridiculous.
    April 5, 2018
    Webster, IA, US
    Purchased
    1 year ago
    Response from Kegworks
    I'm sorry to hear that your tubing arrived with dents. We do our best to package our tubing to avoid damage, but occasionally damage in transit does occur. I will have a customer care representative reach out to you directly to arrange for a replacement to be sent. Thank you for being a KegWorks customer. Cheers!
    April 5, 2018
    Vicky S Staff
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Great Price, Quick ship and high quality.
    February 8, 2017
    Brooklyn, NY, US
    Purchased
    over 2 years ago
    Quality
    5 / 5
    Value
    5 / 5
    5 stars - rails look great against a walnut bar wall. Thanks
    October 23, 2018
    Purchased
    10 months ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Delivered timely and perfectly!
    Fits perfectly!
    August 22, 2018
    Henderson, NV, US
    Purchased
    1 year ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Went together easily. Looks awesome!
    February 27, 2018
    Morrisville , VT, US
    Purchased
    1 year ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Great
    February 27, 2018
    Rancho mirage, CA, US
    Purchased
    1 year ago
    Would you recommend this product?
    Yes! I would recommend this product.
    Quality
    5 / 5
    Value
    5 / 5
    Excellent quality
    Excellent product quality
    November 2, 2015
    85718, AZ, US
    Purchased
    over 3 years ago
    Questions & Answers
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 16 questions Browse 16 questions and 67 answers
    Why did you choose this?
    Kegworks Store
    BUILDING "COWBOY" BAR.
    Don N on Sep 26, 2017
    BUILDING "COWBOY" BAR.
    Don N on Sep 26, 2017
    I have constructed a Home bar. I have searched the internet and found you. thank you.
    Leonard D on Apr 3, 2017
    I have constructed a Home bar. I have searched the internet and found you. thank you.
    Leonard D on Apr 3, 2017
    Is this tubing a true tube or is it slotted?
    michael m on Oct 10, 2015
    BEST ANSWER: The tube is a solid brass tube, not slotted. If you also get the foot supports be advised you'll need to drill a small hole in the tubing for the screw (that comes with the foot support) to secure the tube in place. Without at least one screw in place the tubing will slide freely within the foot support holes. Hope this helps.
    Does it mount to floor or bar?
    A shopper on Oct 25, 2015
    BEST ANSWER: Thank you for your question! Mounting your bar rail to the floor or bar depends on the type of bracket you choose. Our combination bracket screws into the front of the bar while one foot rests on the floor. If you want to mount your foot rail to the bar only you can choose our bar mount bracket, but you will need access to the back of the bar. Lastly, you can choose a floor mount bracket the screws directly into the finished floor. This option works best for wood floors. If you have any specific questions about your project, reach out to our Customer Care department to speak with a bar rail expert. They'll get you exactly what you need!
    Combination Foot Rail Bracket - Polished Brass - 2
    Combination Foot Rail Bracket - Polished Brass - 2" OD
    Bar Mount Foot Rail Bracket - Polished Brass - 2
    Bar Mount Foot Rail Bracket - Polished Brass - 2" OD
    Floor Mount Foot Rail Bracket - Polished Brass - 2
    Floor Mount Foot Rail Bracket - Polished Brass - 2" OD
    is the brass 8' foot rail one piece?
    A shopper on Jan 18, 2016
    BEST ANSWER: Yes it was, two words of advice, if you using the brackets that rest on the floor, don't drill pilot holes all at once, do your first one set the bar up with the brackets on and line them up as you go. Also mine is on a tile floor so I got some adhesive rubber and put pads on the feet so them wouldn't click. I am very happy with mine and its been there 2 years and used every day
    Can two pieces of railing be joined together? My bar is longer than your maximum 8' length.
    Michael H on Feb 13, 2016
    BEST ANSWER: Hi Michael,

    Yes! You can join two pieces of tubing together with our internal splicing sleeve.

    For example, if your desired bar rail length is 12 feet long, you will want to purchase three 4-foot tubes and two splicing sleeves. Place a bracket at each joint for stability and to hide the seam.
    Internal Splicing Sleeve for 2
    Internal Splicing Sleeve for 2" OD Tubing
    How do I go around a corner?
    Brian W on Sep 8, 2016
    BEST ANSWER: In order to go around a 90 degree corner they sell a fitting to accomplish the corner. Parts I purchased all performed well, and looks great! I've gotten a lot of compliments on how well it looks.
    Will the brass stay shiny or does it patina over time?
    A shopper on Oct 5, 2016
    BEST ANSWER: It will age (patina) within a year. However if you are after the "Old corner pub" look, which I was, this is a great product. If you want that shiny new look, then a little elbow work and brass cleaner will be needed>
    Can this tubing be used for a stair hand rail ?
    David N on Aug 20, 2018
    BEST ANSWER: Don’t see why not as long as you have the correct brackets. Don’t forget that it’s hollow and can bend if not adequately supported.
    what do you recommend for cleaning the polished brass rail?
    A shopper on Nov 30, 2017
    Bar Foot Rail Tubing - Polished Brass - 2
    Bar Foot Rail Tubing - Polished Brass - 2" OD
    8' Bar Foot Rail Kit - Polished Brass - 2
    8' Bar Foot Rail Kit - Polished Brass - 2" OD
    8' Bar Foot Rail Kit - Brushed Brass - 2
    8' Bar Foot Rail Kit - Brushed Brass - 2" OD
    BEST ANSWER: I use a paste made from baking soda and half a lemon. Apply with a soft cloth, let stand for 3=5 minutes and then rinse with damp cloth. use a soft cloth to polish the brass. Its cheap and very effective. Make sure you are using on real brass and not brass plated objects.

    mike
    Do you have 45 degree elbows?
    A shopper on Dec 4, 2018
    BEST ANSWER: Yes, please see the link below to our Polished Brass Angle Fitting.
    Flush Angle Fitting 135(45) Degree - Polished Brass - 2
    Flush Angle Fitting 135(45) Degree - Polished Brass - 2" OD
    I need an 8 foot polished brass foot rail which I see you have in stock . i also need a 6 foot rail as well but did not see a 6 foot link listed. Do you carry 6 foot sections?
    A shopper on Jan 2, 2018
    BEST ANSWER: We do not carry Polished Brass tubing in 6 foot lengths at this time.
    My bar is 8 ft , straight. I plan on attaching the brackets to the bar, because my bar is in my garage. How many brackets will I need?
    A shopper on Oct 10, 2017
    BEST ANSWER: We recommend placing a bracket every 3-4 feet. In the case of a straight 8-foot bar foot rail, you will need one on each end and one or two in the middle, depending on how you want them to look.
    I need for outside bar, do you have brass for exterior applications?
    A shopper on Aug 29, 2017
    BEST ANSWER: We do not have outdoor brass for exterior installations for sale on our site. However, our commercial sales team should be able to source this for you. Please contact us at barrails@kegworks.com or call 866-249-2337
    Can I cut the tubing to achieve an exact length?
    A shopper on Mar 1, 2017
    BEST ANSWER: Yes! Our tubing is designed to be cut to length to fit the exact needs of your project. For brass tubing, you can cut to length with a hacksaw and file the edges smooth before completing installation. Cheers!
    Does your company do instalations?
    If so 33844 is the zip code
    Cory P on Jun 7, 2019
    Need 9 foot polish brass 2 inch 2?~end caps 3 foot rest ?
    A shopper on Dec 27, 2018
    I am looking for a sliding ladder rail in polished brass and cannot find one. Would your polished brass foot rail support a ladder and person?
    A shopper on Nov 8, 2018

    Recommended Products

    ×

    About Backorders

    This item is currently out of stock but we're expecting more soon.

    For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.

    Click here for additional shipping information.