KegWorks - Tools for Drinking KegWorks - Tools for Drinking

You have no items in your shopping cart.

KegWorks - ITEM # T1672ST

2-Way Secondary Air Regulator - Polycarbonate Bonnet

Roll Over Image to Zoom

Click to View Larger


In stock and ready to ship.

Running 2 kegs off of one air tank? This is the perfect solution to set the pressure to each keg individually, while still using one air tank.


    Oftentimes, you’ll want to run two kegs in your draft setup and the beer being dispensed from those kegs needs to be regulated at specific pressures. This CO2 tank regulator makes it easy to run two kegs off the same air tank.

    Each gauge is attached to a keg and monitors the dispensing pressure for that particular vessel. You can even individually shut off the gauges and cut off the pressure completely if needed.

    This model features a polycarbonate bonnet that is lighter weight, stronger, and more durable in wet environments than zinc bonnet regulators. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.

    Don’t bother buying a separate beer regulator for each keg in your system. Embrace the supreme durability and efficient convenience of this two-way beer regulator instead!

    • Must be used in conjunction with a primary regulator
    • Gives you the ability to set a different air pressure for each keg
    • 0-60 gauge measure pressure to each keg
    • Has air shut off switch for each CO2 line
    • High CO2 volumetric flow to insure continuity in product dispensing
    • Bonnet material is glass-filled Polycarbonate
    • 10 Micron filter built in to keep contaminants out of regulator
    • Less prone to freeze up problems
    • Approved by Pepsi and Coca-Cola

    Free Expert Support


    Contact Customer Care
    • 2 individual 0-60 psi gauges
    • Shut off valves for each regulator
    • Brass fittings
    WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to
    Shipping & Delivery

    Related Products

    Customer Reviews
    There are no reviews for this item. Write Review
    Questions & Answers
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 2 questions Browse 2 questions and 3 answers
    Why did you choose this?
    Kegworks Store
    recently switched from using single kegs to two sixtels, and realized each beer needs its own gas pressure
    Michael C on Dec 16, 2016
    recently switched from using single kegs to two sixtels, and realized each beer needs its own gas pressure
    Michael C on Dec 16, 2016
    Heard it was the best
    Kim F on Feb 2, 2016
    Heard it was the best
    Kim F on Feb 2, 2016
    Are the individual shut off valves also check valves? or would a separate check valve be needed also. If they are not check valves, can they be replaced with check valves and if so, what model#?
    Bill G on Nov 15, 2016
    BEST ANSWER: Hi Bill, this regulator does not have check valves, There is a part that you could swap, but unfortunately we don't carry it at this time. Thank you for shopping at KegWorks!
    What is the tail piece OD for the gas lines?
    A shopper on Jul 10, 2017
    BEST ANSWER: The barbed fittings are for 5/16" ID hose.

    Recommended Products


    About Backorders

    This item is currently out of stock but we're expecting more soon.

    For an estimated ship date, please contact Customer Care at 877.636.3673 or email

    Click here for additional shipping information.