Item #: C329
If you have an extra-thick wall between your cooling unit and beer tower, then a standard kegerator shank will probably be too short. That’s where this versatile and customizable shank assembly comes in.
Constructed of chrome-plated brass, this shank has a 3/16 in. diameter bore and is made for wall depths up to 24 inches. You can easily cut the shank down to the appropriate length you need. Once you drill the hole and insert the shank, you connect one end to your beer line and the other to your draft beer faucet.
The assembly includes all hardware, including an exterior flange and coupling nut with a sleek chrome-plated finish. When you order this item, you’ll receive three wall anchors and screws, as well as a wrench for installation.
Perfect for home or commercial use, this extra long shank assembly is just what you need to build a unique, custom draft beer system. If you have a multi-tap setup, you can buy these shanks in bulk for extra savings.
- This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Here to help. We aim to be the go-to source for all drink enthusiasts.