KegWorks - Tools for Drinking KegWorks - Tools for Drinking

You have no items in your shopping cart.

Taprite - ITEM # T1695ST

5-Way Secondary Air Regulator - Polycarbonate Bonnet

Roll Over Image to Zoom

Click to View Larger

$239.29

  • Buy 6 for $218.99 each and save 9%

In stock and ready to ship.

You don’t need five separate air regulators to dispense beer in your multi-keg setup. Instead just invest in the dependable efficiency of this five-gauge secondary CO2 regulator!


    Overview

    You don’t need five separate air regulators to dispense beer in your multi-keg setup. Instead just invest in the dependable efficiency of this five-gauge secondary CO2 regulator!

    Each of the five gauges of this secondary gas regulator is capable of flawless pressure regulation of one individual keg in your draft dispensing system. This makes it easy to ensure that all of your kegs are properly calibrated without attaching a separate primary regulator to each barrel of beer. For total control, you can even utilize the shut off valve on each gauge and cut the pressure off completely if needed.

    The polycarbonate bonnet of this secondary regulator is much stronger and more lightweight than a traditional zinc bonnet and it also better stands up to the corrosive possibilities of operation in a wet environment. And for ultimate convenience, the adjustment of each gauge is completely tool-free. Just pull the cap knob, twist to the desired pressure, push it back into place, and enjoy the hassle-free dispensing!

    If you want to save time, money, and energy with regards to setting up your multi-keg draft dispensing system, you need this 5-Way Secondary Air Regulator with Polycarbonate Bonnet!

    Features
    • Bonnet material is glass-filled polycarbonate
    • 0-60 PSI keg pressure gauge
    • Air shut off switch for each CO2 line
    • High CO2 volumetric flow to insure continuity in product dispensing
    • 10 Micron filter built in to keep contaminants out of regulator
    • Less prone to freeze up problems
    • Gray bonnet
    • Approved by Pepsi and Coca-Cola

    Free Expert Support

     877.636.3673

    Contact Customer Care
    Specifications
    Specs
    • Dimensions: 18 1/2”L x 6 1/2”H x 3 1/4”D
    • 5/16" Hose Barb

    WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    Shipping & Delivery

    Related Products
    Customer Reviews
    There are no reviews for this item. Write Review
    Questions & Answers
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 3 questions Browse 3 questions and 6 answers
    Why did you choose this?
    Kegworks Store
    Regulate CO2 from a master tank to a group of beer taps
    Linda B on Aug 29, 2017
    Regulate CO2 from a master tank to a group of beer taps
    Linda B on Aug 29, 2017
    I'm not seeing the tank pressure gauge in the picture, just the gauges for the 5 regulators. Am I missing something?
    Bill T on Nov 21, 2015
    BEST ANSWER: This item is only the 5 secondary regulators and gages. The primary regulator that is required to feed theses regulators is sold separately. These regulators do not accept full tank pressure.
    What size are the barbs?
    A shopper on Dec 28, 2015
    BEST ANSWER: They are 5/16" which is the standard CO2 line size.
    Can this secondary regulator be used for nitrogen as long as using 5/16 hose?
    A shopper on Feb 2, 2018
    BEST ANSWER: Yes! As long as the PSI is set to within the specs of the unit (60PSI or below), you will have no problem using nitrogen in this regulator. Cheers!
    Recommended Products
    ×

    About Backorders

    This item is currently out of stock but we're expecting more soon.

    For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.

    Click here for additional shipping information.