Item #: BLK-76979-2
With 90-degree post foot rail brackets, you can be sure that your bar rail receives equal support from both the floor and the bar facing. In a straight, 7" x 7" design, these bar foot rest brackets are built for simplicity in measuring and placing them during installation.
The shiny stainless steel finish of this bar bracket will precisely match your Polished Stainless Steel two-inch outside diameter bar rail tubing. To install, use an electric screwdriver to attach the bracket onto the desired location of the tubing with the included set screw. Then, use the 8 mounting wood screws to attach the bracket to the face of the bar and the floor. Be sure to measure where to place the screws ahead of time.
These stainless-steel brackets sit exactly 5.94" from the floor to the center of the tubing, and 5.94" from the facing of the bar to the center of the tubing. With two contact points, this double-footed bar rail bracket combines a sturdy build and a practical design. For proper support, bar rail brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
Properly installed bar railing brackets ensure that your foot rail will hold up to the rigors of a whole bunch of feet resting on them. If you're still unsure of which bracket will fit best in your bar, check out our bar foot rail brackets guide for more information on each of the options.
Similar Products You Might Also Like
Item #: 22-S914-2
Item #: 22-NS913-2
Item #: GRY-76979-2
Item #: 76979-2
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Here to help. We aim to be the go-to source for all drink enthusiasts.