KegWorks Homepage
SKU: ORB-990-XX
Bar Foot Rail Tubing - Oil Rubbed Bronze - 2" OD
-
Add a bar foot railing to your setup with this sleek bronze metal tubing. This Oil Rubbed Bronze-finished stainless steel pipe is available in a variety of tube sizes from 2-feet through 8-feet to fit the size of your bar.
With its classy bronze finish, this powder-coated stainless steel bar foot rail is made to add a long-lasting, unique style to any home or commercial bar.
To properly install this 2-inch tubing along your bar, add your chosen style of bar foot rail brackets in the same diameter. Be sure to carefully measure where each bracket will be placed before drilling into your bar, wall, or floor. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
To allow the bar foot rest to match the unique angles of your bar, use elbows and fittings. With end caps and flanges, you can ensure that your bar rail has a finished look and is mounted correctly in any space.
When ordering tubing, it’s always wise to round up to the nearest foot. If your bar is not an even full foot increment, but rather has some inch increment (i.e. 6’2″, 7’2″) you will need to order up to the next foot. So if your bar is 3’2″ you will need to order a 4-foot piece of tubing, if your bar is 7’2″ you will need to order an 8-foot piece of tubing, and so on. If this is the case, you will need to cut the rail with a miter saw prior to installation.
To connect two sections of tubing together, an internal splicing sleeve can be used. The seam between two joined pieces is then covered by placing a bracket over the joint.
By using this Oil Rubbed Bronze stainless steel bar rail tubing with matching components, completing a DIY bar foot rail project is easier than it sounds. Achieve a consistent look throughout your bar, with added comfort for your guests.
-
- Oil rubbed bronze finish
- Made of stainless steel
- Matching components available
- Makes the bar more comfortable for guests
- A stylish addition to any bar
- A bracket should be used at both ends and at every 4’ increment
- Suitable for indoor use only
-
- Outside Diameter: 2"
- Wall thickness: .050"
- null
-
- Expedited Shipping available. Some limitations apply.
- International Shipping: Due to international shipping restrictions, we are unable to ship 8 foot bar rail tubing to international customers. If your project requires a longer rail, simply order 4 foot tubing sections plus splicing sleeve(s) to connect two pieces of tubing. The seam between two joined pieces can be covered by placing a bracket over the joint.
- null
- null
- Attention CA Residents: Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.