-
Bar mount brackets offer a clean, streamlined way to support a foot rail without drilling into the floor. Because the bracket fastens to both the face and back of the bar, it is best suited for installations where the back of the bar face is accessible.
The fully bar-mounted design keeps the floor clear of mounting feet that could become obstructions. It also makes it easier to sweep or mop beneath the foot rail, an especially useful benefit for outdoor bar areas exposed to dirt and debris.
Made from outdoor-grade 316 stainless steel with a brushed finish, this bracket offers enhanced corrosion resistance for exterior applications. It coordinates with matching 2" OD 316 Brushed Stainless Steel bar foot rail tubing for a cohesive installation.
You can create a custom look with bar mounted brackets because they allow you to choose the height of your bar rail. This is the perfect solution for those wanting to mount their bar rail higher than the standard 6”. Be sure to carefully measure where each bracket will be placed before drilling into your bar. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
These brackets mount directly to the face of the bar via three mounting screws and a 2 ¾" bolt that mounts from behind the bar to create a modern look where your metal bar rail tubing looks as if it is floating next to the bar. The threaded hanger bolt is what provides the added weight support to secure your foot rail in place.
For help deciding which bracket will work best for your bar project, check out our bar foot rail brackets guide for more information on each of the options.
Installation instructions:
Bar mount brackets include a 2 ¾" hanger bolt to properly support the weight. To ensure adequate support, a solid backing at least 3/4” deep is required.
- Measure & mark holes for mounting screws and for the threaded bolt.
- Drill hole in bar diewall for the threaded rod.
- Attach bracket from behind bar face using hanger bolt and secure with nut and washer.
- Attach brackets to the face of the bar with the 3 mounting screws.
- Secure tubing to bracket by fastening set screws through hole in the bottom of bracket.
For more detailed instructions on how to install bar rail read our guide to planning & installing.
-
- Made from outdoor-grade 316 stainless steel for enhanced corrosion resistance
- Designed for use with 2-inch OD bar foot rail tubing
- Mounts entirely to the bar face, keeping the floor clear
- Allows the foot rail to be installed at a custom height
- Floating-style design creates a clean, modern look
- Includes a 2¾-inch hanger bolt for added support
- Requires access to the back of the bar face
- Ideal for residential and commercial outdoor bar areas
-
- Bracket Width: 8.00”
- Bracket Height: 6.76”
- Opening Diameter: 2.01” (for 2” OD tubing)
- Wall to Center of Tubing (Horizontal Center Point): 6.94”
- Floor to Center of Tubing (Vertical Center Point): 5.70”
-
- (3) #10 1-1/2" Mounting Screws
- (1) #8 3/4" Self-Drilling Set Screw
- (1) 2 ¾" Hanger Bolt
- (1) Hex Nut 5/16” - 18
- (1) USS Flat Washer - 5/16”
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.

