-
Combination brackets are our most popular style of bar rail bracket because of their classic look and ease of installation. The weight on the bracket is distributed between the bar-mounted and floor supports to fully support your bar rail.
This combination bracket is made from brass with a polished finish, and will precisely match your Polished Brass two-inch outside diameter bar rail tubing.
This bracket sits approximately 6" off the floor (measured from the floor to the center of the area for the tubing) and 6"-7" away from the facing of the bar. With two contact points, this double-footed bar rail bracket combines a sturdy build and a classy design. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
Combination brackets are installed by mounting them to the facing of a bar while the foot of the bracket rests on the floor. They are a perfect solution for anyone that wants a bracket to rest on the floor without having to drill into the surface.
For help deciding which bracket will work best for your bar project, check out our bar foot rail brackets guide for more information on each of the options.
Installation instructions:
- Measure & mark holes for mounting screws.
- Attach brackets to the face of the bar with mounting screws.
- Secure tubing to bracket by fastening set screws through hole in the bottom of the bracket.
For more detailed instructions on how to install bar rail read our guide to planning & installing
Care & Maintenance:
Care and maintenance of bar foot rail varies by finish. Given the nature of the product, typical wear and tear may be noticed with your bar rail over time, such as scuffs, scratches and dirt. Our guide to cleaning & maintenance on how to properly prep, clean & maintain all bar rail finishes.
-
- Made of brass with polished finish
- For use with 2" Outside Diameter bar rail tubing
- Bracket arm mounts to the face of bar while foot rests on the floor
- Brackets should be used at both ends of rail tubing, plus one at every 4' increment
- Mounting & self-drilling screws included
- Suitable for indoor use only (Clearcoat protection available by request)
-
- Bracket Width: 7.25”
- Bracket Height: 7.10”
- Opening Diameter: 2.01” (for 2” OD tubing)
- Wall to Center of Tubing (Horizontal Center Point): 6.13”
- Floor to Center of Tubing (Vertical Center Point): 5.99”
-
- (2) #10 1-1/2" Mounting Screws
- (1) #8 3/4" Self-Drilling Set Screw
- Download Spec Sheet
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Great product
Excellent look with minimal effort
Nice addition to create the finished look. I custom cut a eight foot and a four foot rail with a hacksaw (very easy).
Fantastic product for our club's new bar.
What a high quality product.! I was so pleased with the weight, finish and dimensional consistency of the foot rail bracket and the 2" tubing. With a little planning, the installation went smoothly. Only complaint is that I received seven foot rail brackets and only six sets of fasteners. Another trip to the hardware store was only a small inconvenience considering the quality of KegWorks' products. The rest of the shipment was right on the money. Everything arrived in great condition. Packaging was very sturdy.
It is very nice looking and fits perfectly!
Installation was easy, it is great support for foot rail.
Beautiful components
Quality polished brass finish and easy installation
Excellent product, took good care with packaging. Arrived in great shape.
Easy assembly looks awesome
I was disappointed there were no directions included in the kit.
I was very pleased with the quality. It was exactly what I hoped for.
Perfect addition to my home bar.
Well constructed and nice looking.
Very nice
Does not match what I already had exactly but will not be detectable.
Mancave bar foot rail installation
Very superior product heavy in weight attributed to the solid brass construction.
It was easy to install and looks great I would recommend it !!!
Excellent for home! Fast paced bartending not so much.
This thing is grand! Glass is too thin to stand up to a bar.. I've gone through the initial order very quickly.. very very nice for home and quite helpful. If you are looking for a bar solution try stainless or clear plastic.
Great product
Brass Rail Installation
The rails are beautiful. I build portable bars and have always gotten my rails from KegWorks. The installation is easy. I have one suggestion. The end caps are too loose. It would be nice to have a set screw or something to keep them from falling out. I always add some masking tape on the inside to snug them up.
Great product
I ordered these brackets with the brass rail, elbow and end caps. All items were shipped promptly and were packaged perfectly to survive the trip. The foot rail was easy to install and looks great. We've gotten many compliments on the rail. Thanks Kegworks!
must have item
this is a must have for the bar and kitchen for ease of measuring to get the perfect drink or the right recipe mix
Looks great......
These brackets are quality made and look great installed. Slightly awkward installing the securing screws but worth the effort.
