KegWorks Homepage
-
This stainless steel drip tray helps you serve cleaner beer with a built-in beer glass rinser assembly. The convenient rinser conditions glassware right at the point of dispense to improve the quality of your draft beer, instantly. Simply invert the glass, push down on the sprayer and let the cold water do its job.
A wetted glass improves the pour by encouraging better head retention, while the cold temperature of the water helps to cool the glass. Your tower(s) even mount directly to the seamless bar glass rinser assembly for maximum efficiency. Differentiate your bar from its competitors with this practical, intriguing and stylish piece of equipment.
You’ll need to have a water line accessible, so make sure to check your local plumbing codes!
-
- Made of tough 18 gauge stainless steel with full plywood under support
- Properly conditions glassware at the point of dispense for a better draft beer experience
- Draft tower can mount directly to the tray to eliminate coring of the countertop (you must bore holes, tray does not come with a hole drilled)
You Will Need to Install:
In-line water regulator set at 30 PSI from the street water supply
In-line one way check valve (prevents pressure drop which can cause leaking)
In-line shut-off for the rinser system (this must be turned off nightly)
A 45 1/2” O.D. barb for the drains, if line is not hard plumbed into the system -
- Rinser Tray supports up to 4 draft faucets (draft towers sold separately)
- Overall dimensions: 23-3/4”L x 15-3/4”W
- Drip area: 20-7/8”L x 7-1/4”W
- Tower mount area: 21-1/2”L x 6”W
- Threaded drain outlet: 3/4”
- Water inlet: 1/2” barb
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Great for basement bar remodel
Few things to consider (aside from hiring a professional plumber). When installing your draft tower to the back part of the rinser, make sure you use a hole saw and drill bits graded to cut through stainless steel (I had to buy a special one on Amazon, 2 3/4" worked). Also, make sure you purchase their Glass Rinser Installation Kit - SKU: RDT-KIT. Like most homes per code my water is set to ~50-60 PSI which is too high for this rinser (especially since mine is located in the basement bar). Buying that installation kit will help restrict the flow down to 15 PSI so you aren't rinsing your glasses with a fire hose (or even worse, spraying your new ceiling).Other than that I'm very happy with this product. Lubricates the glass to assist in the beer pouring. I also highly recommend SKU: SUPERTOWERCOOLER (or something similar) to keep your lines cold, which also plays an important role when it comes to beer pouring. No one likes an over-carbonated beer. Bonus tip - it's also nice for quickly rinsing out cocktail mixing glasses when switching from spirit to another (liquids only of course).
Makes a perfect beer pour!
Great product!
