- Keep the draft beer running through your kegerator or short draw draft system chilled on its journey from keg to tap by using our Glycol Pump Kit.
The glycol pump can help you solve issues with warm beer and foamy pours as the beer lines remain in contact with the glycol supply/return line, or trunk line, to keep the liquid inside cool as it travels to the tap.
You just place the glycol chiller pump and reservoir jug inside your kegerator or refrigerator and run the coolant supply/return line up to your draft tower. Secure your beer lines to the coolant line to create your trunk line, and cover any trunk line that runs outside of the refrigerator with insulation tape or foam insulation.
This glycol chiller pump kit will keep short runs of up to 3' properly cooled. -
- Cools Short Runs up to 3'
- Can be Retrofitted to Air Cooled Towers
- Can be Used with Glycol Cooled Towers up to 6 Taps
- Solves the "Foamy First Pour" Problem
-
- 3/8" I.D. Glycol Supply/Return Line
- 72" Total length Glycol Supply/Return Line
- 1500 L/H Pump
- 15w
- Voltage AC 110-120V
- Reservoir size: 7" W x 5" D X 11" L
-
- 1.25 Gal Reservoir
- Submersible Glycol Pump
- 1x Glycol Supply/Return Loop (6' Total Length)
- 1x Jug of Gycol
- 4x Screw Clamps
- 1x U-bend if used in an Air Cooled Tower
- 2x 3/8" Splices if used in a Glycol Cooled Tower
- 3' Power Cord With 2-prong Plug
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
