Whether you're a camper, setting up for an event, or just want to get a better dispensing system for your next party, this triple faucet beer jockey box kit has everything you need (except the beer kegs) for serving three different beers at once.

This 48 quart cooler has a fully-functional draft beer faucet and shank pre-assembled in its side. The three included 50-foot stainless steel jockey box coils should be kept in an ice bath to provide an ultimate refreshing experience with each effortless pour.

This kit includes a durable 48 quart cooler, complete triple faucet and shank assembly, three stainless steel dispensing coils (which should be submerged in an ice bath for optimal chilling), 2 precise two product CO2 regulators, beer and air lines, a CO2 air tank, and three standard US Sankey (D system) keg couplers. Just add a keg and you'll be ready to roll.

To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg. Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and cold throughout to avoid foaming (no more than 40° F).

Be sure to wash out your lines and coils after each use, just as you would normally clean your beer lines. Check out our jockey box instructions and tips for more information on completing your setup.

Please note: We offer many different jockey box setups. To see the full selection and match your needs exactly, please click here.

• Perfect for easy dispensing at parties or events
• Pour three separate beers with three faucets available
• Faucet and shank come pre-assembled into side
• Ultra-portable for maximum convenience
• Dispense beer without a hand pump
• Stainless steel coil keeps beer cold and will not corrode over time
• Includes drain for easy disposal of water
• Three keg couplers (Sankey D), manifold, CO2 air tank and dual-product CO2 regulator included

• Blue Cooler Dimensions: 26"W x 16"D x 15"H w/drain
• Blue Cooler: 48 qt
• Air tank Capacity: 10 lb
• Coil Dimensions: 8”H x 9 3/4” Diameter
• 5/16” outside diameter coil

• (1) Blue cooler with drain
• (3) 50’ Stainless steel coils
• (3) 3” Stainless steel shanks
• (3) 3” Cooler couplings
• (3) Chrome faucets
• (3) Black faucet handles
• (3) 5’ beer line jumper
• (3) US Sankey Coupler
• (1) Two product CO2 regulator kit w/ 5’ air lines
• 5 lb aluminum CO2 tank (shipped empty)
+ 1 Manifold