If you’re going to serve beer at your party, why not use the portable draft dispensing power of a jockey box? It looks professional, it’s easy to use, and it keeps your beer ice cold. This kit includes everything you need except the keg.

This jockey box kit includes a durable 48 quart cooler, complete faucet and shank assembly, stainless steel dispensing coil (which should be submerged in an ice bath for optimal chilling), a precise CO2 regulator, beer and air line, a CO2 air tank, and a standard US Sankey (D system) coupler. All you’ll need to do is head down to your local beverage center and get a keg of your favorite premium brew.

To use, make an ice bath for the coils of ice cubes and water. Set up your jockey box no more than 10 feet from your ice cold keg. Attach the beer line from the top of the keg coupler to the cooler coupling, and the air line from the outlet barb on the CO2 regulator to other side of the coupler. Adjust the keg regulator to 40-60 PSI based on your setup. Keep both the jockey box coils and cold throughout to avoid foaming (no more than 40° F).

Be sure to wash out your lines and coils after each use, just as you would normally clean your beer lines. Check out our jockey box instructions and tips for more information on completing your setup.

Please note: If you don’t need the CO2 tank, we offer both a Single Faucet Cooler with 50’ Stainless Steel Coil and a Single Faucet Coil Cooler Complete Kit without CO2 Tank for your convenience.

• Perfect for easy dispensing at parties or events
• Faucet and shank come pre-assembled into side
• Ultra-portable for maximum convenience
• Dispense beer without a hand pump
• Stainless steel coil keeps beer cold and will not corrode over time
• Includes drain for easy disposal of water
• Built with Coleman coolers & leak proof hardware
• Keg coupler (Sankey D), CO2 air tank, and CO2 regulator included
• Everything you need is included in this jockey box kit except the beer keg

• Cooler Dimensions: 24" W x 15" H x 14" D
• Cooler Capacity: 48 Qt
• Overall Coil Dimensions: 6.75" H x 5.25" W
• Coil Dimensions: 50' L x 5/16" OD
• CO2 Tank Capacity: 5 lb
• Air Line Jumper Dimensions: 5/16" ID x 5’ L
• Beer Line Jumper Dimensions: 3/8" ID x 5’ L

• (1) 48 qt single faucet cooler
• (1) 50' x 5/16" OD mini stainless steel coil
• (2) Hex Nuts for Beer Line - one on either side of coils
• (2) Ferrules for 5/16" OD coil - one on either side of coils
• (2) Grommets for 5/16" OD coil - one on either side of coils
• (1) 3" Faucet Shank for Jockey Boxes
• (1) 3" Cooler Coupling for Jockey Boxes
• (1) Chrome faucet
• (1) Black faucet handle
• (1) Beer Line Jumper
• (1) US Sankey D System Coupler
• (1) Air Line jumper
• (1) Double Gauge CO2 regulator
• (1) 5 lb aluminum CO2 tank (shipped empty)