Taprite - ITEM # 3741-BR
Taprite Economy Beer Regulator
Roll Over Image to Zoom
$49.99
In stock and ready to ship.
This value-priced, double-gauge beer regulator monitors both the pressure going into your keg and how much CO2 is left in your air tank.
- Overview
-
With two gauges, this brass keg regulator monitors both the pressure going into a keg and how much CO2 is left in an air tank.
The low-pressure gauge, which measures pressure to keg, has a display range of 0 to 60 and a working pressure of 0 to 50 PSI. The high-pressure gauge, which measures a tank's gas stores, has a display range of 0 to 2000. There’s also a convenient air shut off switch for when the gas tank isn’t in use.
Order one as a replacement for a worn-out regulator or use it to build out a draft system from scratch. Its value pricing puts it well within reach!
Features
- 0-60 gauge measure pressure to each keg
- 0-2000 gauge measures CO2 in tank
- Working pressure of 0-50 PSI
- Has air shut off switch for CO2 line
- Bonnet material is zinc
- Specifications
-
Specs
- Material:Brass
- Keg PSI: 0-60
- Tank PSI: 0-2000
- Dimensions: 7”W x 7 1/2”H x 5”D
- Fittings: Brass Gas Tailpiece; Tank Connector: CGA 320
- Adjustment Mechanism: Zinc Bonnet
- Shut Off Valves: Brass
- 5/16" hose barb
Includes
Includes double gauge regulatorWARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Shipping & Delivery
-
Related Products
- Customer Reviews
- 4.5 / 5.04 ReviewsQuality4.5 / 5Value4.5 / 5Would you recommend this product?Yes! I would recommend this product. (4)Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Regulates!Screwed right on and worked like a charm with no leaks right out of the box.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5GET THIS ONE!!!This is my second one because I needed to make another draft tower for my neighbors wedding. I have one of the upgraded regulators with the plastic bonnet but I couldn’t get it to work properly, so i ordered this. Worked like a charm.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality3 / 5Value3 / 5The third try is a charmThe first order arrived and the gauge for the Co2 canister was not zeroed out. I called customer service and they immediately sent me another gauge. However when this gauge arrived it was a Right Hand Thread gauge and I needed a Left Hand Thread gauge. I called customer service and again they immediately sent me the correct gauge. So after the third try the regulator is operable.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Questions & Answers
- Start typing your question and we'll check if it was already asked and answered. Learn MoreBrowse 3 questions Browse 3 questions and 13 answersWhy did you choose this?Kegworks StoreConsiderably more economical than equipment offered by Industrial gas suppliers for the same functionalityLarry N on Mar 17, 2020Mine was broken use keg works all the timeTim F on Oct 23, 2019Considerably more economical than equipment offered by Industrial gas suppliers for the same functionalityLarry N on Mar 17, 2020good pricedaniel e on Nov 11, 2019Can the Gage and and Attachment be Flip flopped so it attaches to the left instead of the Right ????BEST ANSWER: That does not seem to be supported unless you have special tools and knowledge to seal them properly. Even then, i would imagine this would not be easy or supported by the manufacturer. You could just flip it around, set the pressure, and then mount your CO2 bottle. But maybe that won't work for you.
- Reply
- Inaccurate
- Keith H on May 2, 2019
- Purchased on Oct 7, 2018
Other than the adjustment knob what's the difference between this regulator and the model T742 regulator?BEST ANSWER: As far as i can tell, nothing. I had an issue with the plastic bonnet model. It had a small leak- dont know if it was something i did or if it was faulty. Anyhow, the cheaper one gave me no problems.- Reply
- Inaccurate
- VintageMike on Aug 15, 2018
- Purchased on Jul 29, 2018
-
If You Like This, You May Also Like
×
About Backorders
This item is currently out of stock but we're expecting more soon.
For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.
