Used in conjunction with your primary CO2 regulator, this secondary CO2 tank regulator can be added to your system to allow you to set individual gas pressure for an additional keg.

When attached to your existing draft beer system, this secondary CO2 regulator will allow you to set individual pressures for each keg being used, with an air shut off switch for each CO2 line.

Choose the one-barb model for individual keg installations or to terminate a series of regulators. Use the two-barb model for series installations.

Each model features a polycarbonate bonnet that is lighter weight, stronger, and more durable in wet environments than zinc bonnet regulators. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.

• Must be used in conjunction with a primary regulator
• Gives you the ability to set an individual gas pressure for a keg
• Bonnet material is glass-filled polycarbonate
• 10 Micron filter built in to keep contaminants out of regulator
• 0-60 gauge
• Air shut off switch for each CO2 line
• High CO2 volumetric flow to insure continuity in product dispensing
• Less prone to freeze up problems
• Approved by Pepsi and Coca-Cola

• Material: Brass
• Keg PSI: 0-60
• Dimensions: 
• Adjustment Mechanism: Polycarbonate Bonnet
• 5/16" hose barb

• (1) Individual 0-60 psi gauge
• Shut off valves for each regulator
• Brass fittings