Item #: M15-801147
Simply fill this cleaning bottle with cleaning solution, untap your keg and connect the bottle instead. Once your keg regulator is turned on, the cleaning solution will run through the beer lines the same way your beer would. Place a bucket under your beer faucet and the solution will flush out into the bucket. It’s a quick and easy way to clean your draft beer system considering your setup actually does the work for you.
For large, commercial draft beer systems, we also offer this product in 15-Liter size. Beer lines should be cleaned every time you switch over a new keg, or approximately every 2-3 weeks.
You will need a standard US Sankey “D” system coupler but chances are you already have one. That’s the coupler used to tap almost all U.S. domestic beers. If you're not sure whether you are using the Sankey system, check with our keg coupler list.
Note: The color of the base and handle may vary.
Similar Products You Might Also Like
Item #: C395
Item #: FT109S
Item #: C193
Item #: PP601
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Here to help. We aim to be the go-to source for all drink enthusiasts.