KegWorks Homepage
-
Serving a wide variety of draft beers (up to 14, to be exact) is a cinch thanks to the pass-thru-style Arcadia Draft Beer Tower.
Constructed of highly durable, corrosion-resistant stainless steel, the Arcadia draft beer tower will be an elegant, dependable addition to your bar. You can even configure your tower with the number of faucets you need – either 8, 10, 12, or 14.
This Arcadia draft beer tower is designed to be used with a glycol cooling system, which uses a separate refrigeration unit (opposed to circulating air) to keep the beer at the appropriate temperature all the way through the faucet. Copper glycol lines are built right into the tower – all you have to do is connect them your glycol chiller system. The tower is also fully insulated for improved temperature efficiency.
For the majority of long draw or commercial draft beer systems, especially those running 6 or more beer lines or draft systems running over 15 feet, a glycol chiller is recommended. This system implements a separate chiller that uses the power of glycol to move beer further distances, while still keeping it cold from keg to tap. Propylene glycol, a non-toxic, food-grade antifreeze, is the main component that's been used for many years in food-processing systems.
This gorgeous tower measures 18.5 inches tall, and between 35.5 and 61.125 inches long, based on how many faucets you order.
For easy installation, your Arcadia draft beer tower comes pre-assembled with shanks and faucets. You’ll also receive vinyl beer lines and mounting hardware. Tap handles are not included with this item, so be sure to add anything from standard faucet knobs to custom tap handles, it's your choice.
-
- Pass-thru draft beer tower with 8, 10, 12, or 14 faucets
- Serve up to 14 different beers at your home or commercial bar
- Made from durable, corrosion-resistant stainless steel
- Ready for glycol cooling - just hook the cooper glycol lines to your unit
- Full insulated interior
- Comes pre-assembled with faucets and shanks
- Easy installation
- Comes with beer lines and mounting hardware
- No mounting gasket needed
- Tap handles sold separately
-
- Overall tower height: 18 1/2”
- Height from bar top to faucet: 14 5/8”
- Distance between faucets: 3”
- Tower diameter: 3 3/16”
- 5’ long vinyl product lines are 3/16” inside diameter
- Glycol lines are 3/8” outside diameter copper
- Width
- 8 Faucet - 35 1/2"
- 10 Faucet - 41 5/8"
- 12 Faucet - 47 5/8"
- 14 Faucet - 61 1/8" (Three Legs)
-
- (1) Stainless steel Arcadia draft tower
- (1) Mounting hardware
- (8 - 14) shanks and faucets per number chosen
- (8 - 14) vinyl lines per number chosen
- Copper glycol lines
- null
- null
- null
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.