Custom-Magnets.com
April 21, 2015, 6:10 pm

We love how the wall turned out! So glad we could share this with our customers. Thanks again guys!!

Allyse
January 30, 2016, 9:43 pm

Ran across your video on YouTube while looking up bottlecap tutorials and this was simply an amazing project! Too bad I don't drink enough beverages or I'd have aspirations for doing one in my house :-) you guys rock and I love the spirit of your company and it looks like you guys and your employees have a great time!

Caitlin Hartney
February 4, 2016, 7:01 pm

Thanks for being a fan, Allyse! We do have a great time. We're glad it shows!

Ryan
September 12, 2016, 7:35 pm

Thanks for sharing the idea, details and high quality production video (I came across this on YouTube. My 8yo son collects bottle caps and this is a perfect way for him to display them (on his bedroom wall).

Caitlin Hartney
September 16, 2016, 3:12 pm

Your son sounds pretty cool! If you do make a bottle cap wall, we'd love to see a photo of the finished product.

Jeff
October 10, 2016, 11:35 pm

What do I need to do the same in my garage? I have a bunch of caps that need a wall. Is the indoor good for a garage?

Very cool idea,

Jeff

Clare
February 19, 2017, 10:51 am

Your wall looks soooo cool! Two questions - does the magnetised sheeting affect any of the tech etc in the office, and has any one ever dared to move (or even pinch) some of the bottle caps?! Bet people have been tempted!

Caitlin
February 27, 2017, 5:17 pm

Hi, Clare. I have no knowledge of the sheeting affecting our IT. As for moving the bottle caps, people (especially visitors) occasionally brush against the wall and knock a bunch down, so that's always a fun clean up!

Shawn
March 6, 2017, 2:17 pm

Hi = could you tell me about how many caps fit in a say square foot area? We're looking to do something similar and want to estimate how many caps to get

David
March 24, 2017, 4:53 pm

I just measured and counted... one square foot equals about 110 caps. Best of luck with your project!

American Badass
March 26, 2017, 5:16 am

Who's the tatted up chick in the black heels ? She's smoking hot !!

victoria davison
May 24, 2017, 11:31 am

Where do I get the magnetic wall covering from?
Is there anywhere in the uk that sells it?

Caitlin
August 3, 2017, 6:53 pm

Hi, Victoria. We got the sheeting here: http://www.custom-magnets.com/flexible-magnetic-sheets-with-adhesive-50-ft-rolls.html

Caitlin
August 3, 2017, 6:54 pm

It hasn't affected our tech, no. As for moving the bottle caps, yes - people are regularly tempted. :) Sometimes, people don't realize it's magnetic and will brush against it or run their hands across it and knock a whole bunch down at once. That's always fun!

Dan
February 13, 2019, 4:35 am

Very awesome! I started my bar walls in my home about the same time you did. I'm just one guy drinking beer with friends and probably have 8,000 bottle caps so far. My bar top has about 1,300 non-mathcing caps, which was a challenge, but they are awesome with grout under epoxy. If you have boxes of bottle caps left, let me know! The project shall go on.

Chris
February 13, 2019, 1:48 pm

That's awesome Dan! While I don't believe we have extra caps saved up around the office, I can check. If you would you want to send some photos along for us to look at and possibly share on social media, we'd love to check them out. Send an e-mail to cherbeck@kegworks.com if you'd like. Thanks!

Nick
September 29, 2019, 9:25 pm

Looks great, I've been saving all of mine for about 5 years with no real reason in mind. Think I'm up to 5000-7000 I like this because it doesn't damage the caps in any way. Is there a reason you used 30 mil? Was the 20 mil type to weak to hold the caps up? Thanks!

Katie Johnson
October 14, 2019, 1:55 pm

Hi Nick, while its possible the 20 mil would hold the caps, we wanted the extra strength to make sure that caps were not falling off randomly.

Custom Magnets Direct
October 4, 2021, 10:23 am

This looks so cool! Thanks for Sharing!

Andy
January 10, 2022, 3:09 am

How did you attach the magnetic sheeting to the wall?

Jim Tabler
July 3, 2022, 5:27 pm

This is very cool. Was the magnetic sheeting hard to get and was it expensive? The video was very cool and I love the beginning where the cap travels from the floor up to the wall. Who did the video creation for you?

David Rivers
July 16, 2022, 3:00 am

The sheeting was just screwed into the wall every few feet. Super easy.