KegWorks Homepage
-
Combination brackets are our most popular style of bar rail bracket because of their classic look and ease of installation. The weight on the bracket is distributed between the bar-mounted and floor supports to fully support your bar rail.
This combination bracket is made from brass with a satin finish, and will precisely match your Satin Brushed Brass two-inch outside diameter bar rail tubing.
This bracket sits approximately 6" off the floor (measured from the floor to the center of the area for the tubing) and 6"-7" away from the facing of the bar. With two contact points, this double-footed bar rail bracket combines a sturdy build and a classy design. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
Combination brackets are installed by mounting them to the facing of a bar while the foot of the bracket rests on the floor. They are a perfect solution for anyone that wants a bracket to rest on the floor without having to drill into the surface.
For help deciding which bracket will work best for your bar project, check out our bar foot rail brackets guide for more information on each of the options.
Installation instructions:
- Measure & mark holes for mounting screws.
- Attach brackets to the face of the bar with mounting screws.
- Secure tubing to bracket by fastening set screws through hole in the bottom of the bracket.
For more detailed instructions on how to install bar rail, read our guide to planning & installing
Care & Maintenance:
Care and maintenance of bar foot rail vary by finish. Given the nature of the product, typical wear and tear may be noticed with your bar rail over time, such as scuffs, scratches, and dirt. Our guide to cleaning & maintenance on how to properly prep, clean & maintain all bar rail finishes.
Please note: Due to differences in the production and material of our brushed brass tubing and components (brackets, endcaps, etc.), you may notice a slight color variation when you first receive them. This will balance out over time as the brass naturally patinas. Patina is a naturally-occurring chemical process where oxidization takes place due to exposure to carbon dioxide and/or water. -
- Made of Brass with satin finish
- For use with 2" Outside Diameter bar rail tubing
- Bracket arm mounts to the face of bar while foot rests on the floor
- Brackets should be used at both ends of rail tubing, plus one at every 4' increment
- Mounting & self-drilling screws included
- Suitable for indoor use only (Clearcoat protection available by request)
-
- Bracket Width: 7.25”
- Bracket Height: 7.10”
- Opening Diameter: 2.01” (for 2” OD tubing)
- Wall to Center of Tubing (Horizontal Center Point): 6.13”
- Floor to Center of Tubing (Vertical Center Point): 5.99”
-
- (2) #10 1-1/2" Mounting Screws
- (1) #8 3/4" Self-Drilling Set Screw
- Download Spec Sheet
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Excellent product and excellent customer service
Mark Cretan was extremely helpful and professional in guiding me how to choose the correct equipment/ pieces to complete our breakfast bar. Although, corbels not painted yet, we love it thank you Mark for everything!
Looks great
Bar Rail looks great
Just what we needed to finish the look we wanted. Bar and rails fit together fine. Look is great. Highly durable, will be a centerpiece for our area. I highly recommend this product
Looks great and is easy to work with.
Great rail!
Excellent foot rail. Easy to install and very sturdy!
very nice decanter
Wonderful product! Great service!
Combination bracket
The brushed brass combination brackets are attractive and easy to install. The weight bearing foot is good to have.
I got both the brushed brass and polished brass and the brushed is definitely worth it. Great quality.
Questionable about what finish we had!
Our brushed satins do not match but it will work!
Brass Bar foot rail
Brushed brass is much more difficult to find than polished. This is a very nice high quality foot raiil
Tradition of making Glogg
Please don't stop carrying this product! Had great difficulty finding anywhere in stores. Thanks goodness I found it here. Many family memories of making Glogg together; this year the kids joined in to carry the tradition on in their own families. We have made our own mix before....with a few additions to yours, we prefer yours. Thanks!
Just installed and love the look
Just purchased this product along with the rod and end caps. Haven't tried to clean it but have cleaned the floor around it and it seems just fine. I was concerned about dirt accumulating around it on the floor but so far it's fine. Can't speak to cleaning the product or durability yet. The look is exactly what we wanted...a more vintage brass bar rail that you would find in the cafes of France.
Good!!!