Flush Elbow Fitting 90 Degree - Brushed Stainless Steel - 2" OD
Roll Over Image to Zoom
$35.99
In stock and ready to ship.
This flush elbow fitting will turn a bar foot rail at a 90° angle, allowing your bar rail to reach every corner of the bar without a custom bend.
- Overview
-
No home or commercial bar setup is the same. With this flush elbow fitting, you can turn a corner in your bar 90 degrees with ease to match the shape of your bar.
The stainless-steel finish of this elbow fitting will exactly match your Brushed Stainless Steel two-inch outside diameter bar rail tubing. Just slide a rail on either end, secure the tubing with matching brackets, and enjoy the comfortable addition that seems custom-fit to match any L-shaped turns in your bar.
It’s time to give your bar the finishing touch it deserves with bar rail that matches its shape, from one bar edge to the other. Hardware like this flush elbow fitting makes it easy to install a bar foot rest that perfectly fits your bar's design.
Features
- Made of brushed stainless steel
- Insert 2" OD bar rail tubing into either side
- Tubing slides in easily and is held securely
- Elbow fitting slides into tubing for a straight flush look
- The easiest way to turn 90° corners
- Designed for indoor use only
- Specifications
-
Specs
- For 2” Outside Diameter tubing
WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Shipping & Delivery
Related Products
- Customer Reviews
- 4.5 / 5.02 ReviewsQuality5.0 / 5Value5.0 / 5Assembly/Installation5.0 / 5Would you recommend this product?Yes! I would recommend this product. (1)Quality5 / 5Value5 / 5Assembly/Installation5 / 5Great product, good fit and finish, whole rail looks great!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Assembly/Installation5 / 5Arrived quickly and nice and solid. Easy installation only problem was that the supplied screws were terrible had to get new screws. Only because of the screws I have to give this a 4 . Other than that this rail will hold up to years of service.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Response from KegworksThank you for your feedback. We are working on improving the quality of the included screws. Thank you for shopping at KegWorks!April 4, 2017Vicky S Staff
- Questions & Answers
- Start typing your question and we'll check if it was already asked and answered. Learn MoreBrowse 1 question Browse 1 question and 1 answerMy bar rail will be L shaped. 6’ on the long part of the L and 3’ on short part,with an elbow connecting them. May I place 1 support bracket at the elbow to serve as the support for the left end of the small leg and the right end of the long leg?BEST ANSWER: Hi Howard, for your install we would recommend using a total of five brackets. Three brackets on the 6' side and two brackets on the 3' side. You would have one bracket on either side of the elbow, each placed about 6" from the corner. If you have any further questions about your install, please let us know! Cheers!
- Reply(1)
- Inaccurate
- Vicky S Staff on Jan 29, 2019
Recommended Products
About Backorders
This item is currently out of stock but we're expecting more soon.
For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.
