-
This heavy duty draft beer faucet wrench and hex nut wrench is the versatile tool you need to install and maintain proper flow throughout your system.
One side is a spanner wrench that helps tighten draft beer faucets to beer shanks or beer tap towers. The other side is a hex nut wrench which tightens the nut on your keg coupler. Proper tightening throughout your system will prevent leaks and your beer pouring properly.
Made in USA of steel with a rubber grip handle, you can be confident that this essential tool will prove sturdy and easy-to-use for draft beer maintenance, repairs, and installations whenever you need it.
-
- Steel with rubber grip
- Use as both a beer faucet and hex nut wrench
- Tighten beer shanks, draft faucets, tap towers, and keg couplers
- Control leaks
-
- 7 inches long
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Works great!
Works Great
Loosens and tightens faucets very easily. Use it to remove and clean faucets and lines every time I swap out a new keg.
works better than vise grips
solid basic wrench. cheaper than alternatives and gets the job done for adjusting faucets.
Works great!
Heavy Duty Beer Faucet & Hex Nut Wrench
Expected a bit more heavy duty, but works fine.
Love it...so much better than those small cheap ones.
Exactly what I expected.
Works great! Excellent quality!
Poorly designed
Slips on the tap collar and is too large to handle the tight nut spacing on a double tower.
Love it does the Job
Good!
combo tool
Nice combo tool! Works well. Most importantly....I'm drinking again thanks to this guy!
Right tool - right price - from the right place
The wrench did what I needed it to do, tighten the faucets on my beer tower. The hook side did a great job on the faucets themselves. As long as you are careful and apply even pressure, you should not have any issues with the wrench slipping and scratching your hardware. Again, you don’t need to reef on it, just snug it down and give it a tiny bit more.The wrench end is a little wide for my beer tower. Initially I thought it was going to be too wide, but it was just right to get the nuts inside the tower tight so the taps would no longer move.I don’t know why such an integral tool did not come with a complete tap tower, seems silly really. But if you are like me and you find yourself needing one of these - I can vouch for this one. And I didn’t have to wait 2-3 months for some large Internet company to decide to ship it to me.
Design stinks
Tool slips out of the hole. Had to grind it down to make it work right.
A 1 dollar wrench coated in plastic
A total rip off for a simple wrench that should cost $3 bucks tops
Faucet tool
I have had kegs in refrigerators since 1978. I finally bought this tool and I’m kicking myself for not getting one sooner. It works great and makes it much quicker and simpler to keep the faucets clean, I currently have 4 in my barroom. Pair this with the faucet caps and you’ll have better beer always. Tom StumpfHaymarket, Virginia. (Originally from Dunkirk, NY)
The wrench part of the tool is great. The grip is great. The product is well made minus the spammer wrench part. The nub isn’t big enough to grip the holes. At least 80% of the reason for buying the tool is for it to be a duel purpose tool and only got 1 tool out of the deal. Price point wasn’t bad so I wasn’t overly disappointed with the tool
Great tool, works very well
The faucet wrench is well constructed and works perfectly for tightening the faucet onto the shaft. I assumed the open end would fit the nut on the 7/8 inch shaft on the inside of the kegorator but it is too small. Product is sturdy and will never need to be replaced!
Big Tool, little price
Stout little tool, made very well. No problem tightening or loosing beer lines, Co2 lines or the facets.
Sorry but not good news on this wrench. About 5th time I used it, I broke the tip off it!!
