Internal Splicing Sleeve for 2" OD Tubing
Roll Over Image to Zoom
$18.99
In stock and ready to ship.
This bar rail splicing sleeve easily and securely connects two pieces of 2-inch outside diameter bar rail.
- Overview
-
Need to join two pieces of tubing together for your foot rail? This metal tube connector easily and securely connects two pieces of 2-inch outside diameter bar rail.
To install, just slide it inside your bar rail tubing and it will act as a completely invisible, internal collar that offers you a stable, sturdy tubing foot rail connection.
These stainless steel tube connectors are entirely hidden from view, so they can be used with any finish of bar foot rails or handrails. Combine two lengths of any 2" OD steel or brass tubing in your bar rails with a seamless look with these simple metal pipe connectors!
Features
- Made of stainless steel, but is used for all finishes of rail
- For use with 2" outside diameter bar rail tubing
- Entirely hidden once tubes are joined together
- Connects smaller pieces of tubing to make one cohesive rail
- Suitable for indoor use only
- Specifications
-
Specs
- Length: 6"
- Made for 2” Outside Diameter tubes
- Click Here For Detailed Measurements
WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Shipping & Delivery
-
Related Products
- Customer Reviews
- 4.4 / 5.08 ReviewsQuality4.6 / 5Value4.1 / 5Attractive Design4.0 / 5Easy to Clean5.0 / 5Assembly/Installation4.4 / 5Would you recommend this product?Yes! I would recommend this product. (8)Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value4 / 5Assembly/Installation5 / 5The splicing tubes worked great. Just make sure your splice in within a floor bracket so that it hides any cutting imperfections.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality4 / 5Value4 / 5Assembly/Installation5 / 5- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Assembly/Installation5 / 5- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Assembly/Installation5 / 5Perfect fit.We used this to join two pieces of 2" OD brass rail that we got from a scrapyard. It fit perfectly, and it even worked out that the joint was hidden by one of the supports.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Assembly/Installation5 / 5really strengthens the rail with the bracked sleve- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Perfect fit, allowing me to add onto a previously purchased Keg Works copper bar rail to accommodate a 10’ island/bar. Great, great quality, customer service and extremely prompt shipping!- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value4 / 5Attractive Design4 / 5Easy to Clean5 / 5Assembly/Installation2 / 5So soMade very well but had a real tough time compressing it and joining the tubes. Even with channel locks. There has to be a better way but u til there is, I'll still recommend it.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality3 / 5Value1 / 5Assembly/Installation4 / 5Won't hold under pressure...Nice idea, but doesn't hold weight. It moves because of the slice that allows it to fit. A PVC pipe worked perfectly inside without any movement. And cost a lot less. Shouldn't rust either...- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Response from KegworksThank you for your feedback. I'm sorry to hear that this didn't work for your application. I'm not sure of your exact bar rail design, but when two pieces of tubing are connected via a splicing sleeve the seam should be covered by a bracket which will carry the load/hold weight. If you have any questions or concerns, please feel free to contact our customer care team. Cheers!November 6, 2018Vicky S - Questions & Answers
- Start typing your question and we'll check if it was already asked and answered. Learn MoreBrowse 3 questions Browse 3 questions and 56 answershow long are the splice tubes ?BEST ANSWER: It's been about a year or so since I installed this , but I think it's about 6" long
- Reply
- Inaccurate
- Jon C on Jan 31, 2017
- Purchased on Mar 26, 2015
Are sleeves avail on the Sunset Copper tubes. I don't see it in that color?BEST ANSWER: The color of the sleeves don't matter because they are inside the pipe and if you measure it right the seam should end up inside a bracket so they are not visible. Good luck with your project, the product you get from Keg Works are fantastic and look awesome.
Larry Whyte- Reply
- Inaccurate
- Larry Whyte Reclaimed Wood Projects on Jan 18, 2017
- Purchased on Jan 26, 2015
-
If You Like This, You May Also Like
About Backorders
This item is currently out of stock but we're expecting more soon.
For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.