-
When there are clearance issues in your beer fridge, this 90-degree keg coupler elbow can convert your keg coupler into a low-profile one.
It's made of durable plated brass and features a 3/8-inch bore that fits on a variety of couplers. Another option for someone experiencing clearance issues in their kegerator or beer fridge is to purchase a low-profile keg coupler.
To ensure a secure, leak-free connection, this elbow should be paired with a rubber washer(sold separately).
-
- For use in tight clearance situations
-
- Dimensions: 2"W x 1"H x 1"D
- Bore : 3/8"
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
High Quality.
Very well machined. Keeps the beer line from getting kinked with the taller type A coupler.
Saved the Party
I was hosting over 50 guests for an Octoberfest. Purchased my first German half keg and found out that with the European coupler, it would not fit in my kegerator by about 1/2”!! The 90 degree elbow was exactly what I needed! Well made and fit perfectly! Thanks.
A handy Item
Does exactly what it says it does. Makes the tall kegs fit in my kegerator.
Not the correct dimensions, insufficient product description or poorly described.
Not the correct dimensions. Does not fit.
These 90• elbows work great. No more hose’s kinked against the top of the kegerator. They make the keg’s easier to get in the kegerator also. Only thing that would make it better is if the shipping was cheaper. I’m spoiled by not having to pay shipping.
Get that German Beer
Works great! I bought a keg of Weihenstephaner Hefeweizen and with the German coupler I could not fit the keg in my Marvel Kegerator. With the 90° Keg Coupler Elbow it fits right in without any issues.
Great solution to kinked line
Works perfect in my low height kegerator where my beer line was kinked. Solution is exactly what I needed and beer flow is not affected.
Super Quality
Super Heavy Duty.
Perfect solution for tall keg / coupler!
I use a full keg (1/2 Barell) of Warsteiner. Being a European keg it requires a different coupler which makes the keg / coupler a bit tall inside the kegerator causing the beer line to crimp.This 90° elbow is perfect to alleviate this problem!
needs a ring cut so the washer won't slide but if you don,t over tighten it ti works fine
Super helpful
Tight fit
Ideal for saving space in the beer fridge.
great piece to have for tight spaces.
Works well. No problems installing and provides the clearance I needed.
I wish I had this years ago
My Kegerator is ten years old and I have been using this elbow for between two and three years now. It was recommended to me by a Salesperson at Kegworks because I was complaining how the top of my kegs were very close to the ceiling of the kegerator and the hose would almost pinch off when putting the keg into the fridge. This not only took care of the problem but simplified the hose situation completely. I would recommend it even if you had plenty of room above your keg. Well woth it.
Works great!
I bought this because the liquid hose coming off the sankey was touching the top of my keggerator. This gave me the clearance i was looking for. I wish i knew this existed sooner.
what I needed
works as needed
Additional room in fridge
Works great. Ordered keg of Spaten and coupler was too tall, couldn't fit keg into fridge with line running out of keg vertically. This right angle connector solved the problem. Actually creates a much better tube routing situation and will add to normal keg coupler once Spaten runs dry.
SOLVED MY PROBLEM
GERMAN KEGS WERE TOO TALL FOR MY KEGERATOR
Limited space above the keg
Perfect for my application where I had limited space above the 5 gallon tall keg with the valve in position...in my under cabinet kegerator.
The replacement part was much better quality. The manufacturer could have better quality control. Kegworks is excellent. They do all they can to make things right.
