KegWorks Homepage
-
Think your extra fridge is too small to become a draft beer dispensing system? Think again, because that’s exactly what this tower kegerator conversion kit is made for.
Featuring a stylish single-faucet draft beer tower, the conversion kit is a great choice for compact, shorter refrigerators for two reasons. First, the beer tower is mounted on top of the fridge unit, eliminating the need to run the faucet and shank through the door (as with a standard conversion kit).
Second, the kit comes with a low-profile US Sankey coupler that only sticks up ¾ inch above the keg. This solves issues with low clearance. The D system Sankey keg coupler is compatible with the vast majority of domestic beers such as Bud, Coor's, Miller, and tons of craft beers. Before ordering this item, double check with our keg coupler list to make sure your beer uses the D system.
Another benefit of this kit is that it comes with everything you need to complete your system. That includes a 5 lb. aluminum CO2 tank, a CO2 regulator, beer and air lines, and all the small connectors and washers.
When it comes to building your kegerator, follow the 12 steps of our instructions, and you’ll be pouring fresh beer in no time. With this kit, you also have the option of mounting the chrome beer tower right into your bar. If you go this route, but be sure not to have too long of a run to the refrigerated keg, as that may cause performance issues due to unchilled lines.
With an extra refrigerator, some basic hand tools, and this kegerator kit, you can enjoy draft beer at home anytime. Learn how to set up your system in minutes with this simple homemade kegerator guide! We’ve even put together detailed, easy-to-follow instructions.
-
- Beer tower kegerator conversion kit for one keg
- Turn your fridge into a beer dispensing system
- Ideal for small, shorter fridges
- Chrome beer tower mounts on top of fridge or bar
- Low-profile US Sankey (D system) keg coupler works great in tight spaces and fits most domestic kegs
- Complete kit with everything you need to build your kegerator
- Includes 5 lb. CO2 tank (empty)
- Easy installation with detailed instructions
- null
-
- 5 lb Aluminum CO2 tank (empty)
- Single tap chrome beer tower
- Low profile US Sankey keg coupler
- (1) Double gauge CO2 regulator
- Chrome faucet head
- Faucet knob
- 5’ Beer line with connectors
- 5’ Air line with clamps
- Rubber gasket
- Rubber washers
- Detailed instructions
- null
- null
- null
-
Attention CA Residents:
Prop 65 Warning >
This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.