KegWorks Homepage
-
The Perl 690SS Perlick faucet tap comes with all the advanced features you need to master the art of draft beer pouring. It will also work with just about any other draft beverage you're looking to pour, with top-of-the-line precision.
For starters, the faucet is constructed from 304 stainless steel. This ultra-durable material won't corrode, pit, or tarnish, and you'll never have to worry about your beer being tainted by a gross metallic taste, which can happen with lower-end materials.
The Perl 690SS is built with Perlick's patented forward-seating design that improves sanitation by sealing your beer off from outside air, as well as prevents the lever from sticking. An extra-vertical spout improves drainage and prevent beer from accumulating inside the faucet.
On the right side of the faucet is a flow control valve. You can use this lever to adjust the flow rate of beer to avoid excess foam. This is especially useful for hard-to-pour beers, if you're serving a wide variety of styles, using frosty mugs, or serving sampler glasses.
This premium faucet also includes a creamer action handle. Just like any normal faucet, you pull the lever forward to start pouring. However, with the Perl 690SS, you can also push the lever backward to engage a special mechanism that tops your beer off with the ideal amount of creamy head. You can use this faucet to serve a wide range of beers, as well as wine on tap, kombucha on tap, large-batch cocktails, or anything else you're pouring.
Made to fit standard shanks and beer towers, the Perlick Perl 690SS is superb for new draft system or upgrading your existing faucet. It's also NSF-approved for commercial use. To finish up your faucet, add your favorite tap handle (not included).
-
- Perlick draft beer faucet
- Expertly engineered and innovated
- Constructed from 304 stainless steel — wonΓÇÖt pit or tarnish
- Flow control lever allows for pouring control
- Push-back creamer lever for right amount of head
- Forward-sealing design prevents air exposure to beer
- Redesigned spout angle provides for better pouring and draining
- Ideal for new draft beer systems or as a replacement faucet
- NSF-approved for commercial use
- Fits standard North American shanks and draft beer towers
- Works with standard tap handles
- Handle not included
-
- Fits US standard shanks
- Made of 304 Stainless Steel
- Push back handle creamer functionality
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Works as intended great buy
Would not buy again because it drips and leaks beer.
I put one of my faucets on and It did not work because it had a Constant continuous drip of beer Nonstop. So I tried to tighten the handle and it broke off!! I bought two of them and now have one left. I have not tried the second faucet yet. I have two heads on my tap system and that is why I bought two faucets.Charles Oschwald
Installed this faucet to compare with other flow control / creamer faucets on the market. So far, so good!
The best
Best faucet on the market.
Worth it
Perfect for pouring different styles of beer or dealing with a foamy keg.
Works great would buy again
Buy the 650SS instead of the 690SS.
I’ve only had the 690SS faucet installed two months and the faucet valve is leaking by already. The creamer function is worthless. Save some time and money and just buy the 650SS for the valve control function for slow pours.
Well built and solid faucet. Gives you the ability to control the flow on the fly. Nothing against the product but for my application it was a bit of overkill. I generally pour IPAs from a home kegerator, and this was a big improvement over the standard faucet. However the creamer function wasn’t needed for me. I personally would opt for a more basic model
First Class Faucet
This faucet is perfect for a multi tap system (I have 3) with one CO2 regulator. The quality of the faucet compared to the standard faucet is immediately noticeable. Very happy with this faucet.
Best Regulator
I purchased this item to upgrade my kegerator to two taps. Easy to install and use. Keeps my beer flowing steady. Good value.
perlick 690ss
i used it on a ipa and a stout creamer function works great a must have
Need Adjustment Perlick 690ss
At the moment, I am not happy with this product. Why? Too much foam. I've lowered my pressure CO2 pressure gage to 5-6 psi and raised it up to 9 psi, but still produce a lot of foam. Also, I can't push back on the handle in order to get cafe foam style. The handle does not not go back, only forward. I've tried to contact Kegworks several times but unable to get anyone on the phone. However, I did manage to get a representative today for the first time in 4 weeks (Eastern Time). Your representative gave me some advice in adjusting my pressure gage higher than 9psi. He said to try to set it at 12psi. I will try it now and will let you know.I love Kegworks company, but like anything, I just have to keep trying to adjust your product and eventually I can make it work. I will continue to purchase all my beer tap accessories from Kegworks. I've purchased many products from your company and I have no complaints....Thank you
Creamer feature is a wonderful feature.
The creamer feature works really well. I was hesitant at first, thinking I didn’t need it since I’m used to slightly opening the faucet to agitate the C02 out of beer for a appetizing foam. Creamer function works much more elegantly and consistently.