-
This Taprite CO2 draft beer regulator is a necessary part of any draft system as it manages the flow of gas to your keg coupler. Its polycarbonate bonnet and brass design make it durable and easy to use.
This double gauge keg regulator has one gauge that tells you the pressure going to the keg and another that shows the amount of CO2 remaining in the air tank. The nonadjustable “shut down” blows off at 55-65 psi. It has a convenient CO2 shut off switch.
The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators, and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down, and then pushes back in to lock in pressure.
-
- 0-60 gauge measure pressure to each keg
- 0-2000 gauge measures CO2 in tank
- Has air shut off switch for CO2 line
- High CO2 volumetric flow to insure continuity in product dispensing
- Bonnet material is glass-filled polycarbonate
- 10 Micron filter built in to keep contaminants out of regulator
- Less prone to freeze ups
- Approved by Pepsi and Coca-Cola
- Trusted Taprite Brand
-
- Material: Brass
- Keg PSI: 0-60
- Tank PSI: 0-2000
- Dimensions: 7”W x 7 1/2”H x 5”D
- Fittings: Brass Gas Tailpiece; Tank Connector: CGA 320
- Adjustment Mechanism: Polycarbonate Bonnet
- Shut Off Valves: Brass
- 5/16" hose barb
-
- Includes double gauge regulator
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
The part. Arrived on time with no issues
Quality regulator
This regulator is easy to use and works great.
Great Regultor
Simple easy to operate.
Very happy
Taprite Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet
Worked as expected. Easy to adjust and held consistent pressures. We used this as part of a jockey box settup. Seems to work best with pressure set at 30 psi.
So far so good.
These Adapters are not what you’re looking for
I used these weekly since August 2019, and cleaned it after every use in a commercial setting. The pot metal body corroded until they became unusable. When I quit using them, I couldn’t dissemble them for deep cleaning.
Serviceable and functional
The regulators work fine, but purchase the gauge protectors to protect your investment
Works great so far. Gauging knob can be tricky to pull in and out
Premium double gauge regulator
Great regulator. Combined with the Perlick flow control faucet I have eliminated all of my foamy beer issues!
Solid Quality
Solid piece that replaced a lesser quality leak at the gauges. Got me back up in 45 mins.
Takes a while to get to the desired pressure
Purchased this as we bottle hard cider and need to be able to adjust down to about 5 PSI. Most gauges don't have that small of a scale or it isn't graduated that fine that low. Once we were able to hone in on our desired psi it worked ok - seemed to need to adjust a lot though.
Great Regulator
Works great no complaints
Great product great customer service
Regulator
Works as expected. Happy that I was able to acquire the o-rings for the end that connects to the tank. Wish I could have gotten them from you. You might consider adding them to your inventory.
Replacement
Fits like a glove, and works like a dream. It was a big upgrade from the previous similar model. You can't go wrong......
Holding steady
Holds the co2 great , easy to ajust
Reliable and simple product to adjust
Everything I thought it would be
It was time for a change
After 53 years of continuous service for my father and me I trashed my old Perlick regulator and got the Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet -- I really like the two gauges and the built in washer is very nice. Working perfectly!
good product for the price
