KegWorks Homepage
Part #: QD316-X
Quick Disconnects for 3/16" ID Vinyl Hose
Add these quick disconnects to your beer lines and make it easier than ever to swap out couplers and other beer and air side accessories.
- Need Help? Chat Now
- Simple Returns Learn More about returns
-
Adding these quick disconnects to your beer lines allows you to easily disconnect and replace lines or your draft beer system parts.
Made of plastic and NSF approved, these quick disconnect beer fittings make an audible clicking noise, so you know when your lines are connected. You can purchase individual male and female couplings, or buy the set and get one of each. There are also shutoffs to prevent leakage when they're disconnected.
It's recommended that quick disconnects are secured to your lines with tab clamps or screw clamps.
-
- Stainless steel springs
- O-ring made of food grade Buna-N
- Body, thumb latch and valve made of acetal
- Fits 3/16-inch inside diameter hose
- Shutoffs prevent leakage when disconnected
-
- Dimensions: 2 1/16" long individually or 3 1/2" long connected together
- Vacuum Pressure: Up to 120 PSI, 8.3 bar
- Product functions in temperatures between 0° F - 180° F
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Great quality disconnects. Makes keg change out a snap.
Great quality disconnects. Makes keg change out a snap.
Worked greatThanks
Not just for brewing
I'm using these quick disconnects at work for CO2 MIG hose. I use them to connect to the tank or to add an extension of hose for work further from the weld machine.
Works perfectly as I expected. No leaks, really a quick disconnect. Great product!
Make your life easier
These things are GREAT! I have a 3 tap kegerator, a nitro system and I also keg my own brew. These things make it quick and easy to swap out any of my connectors onto any of the beer lines. No leaks, even on beers I am running at a high PSI. Order a female end for each beer line and a male end for each connector you have.
Convenience
Nice addition to my tap system. Easy to disconnect from my keg fridge when needed. Both connections seal closed when disconnected from each other.
Works Great
I use these to connect to an O2 regulator for oxygenating wort. They fit the 3/16th line perfectly. Just heat them up a bit and connect. Once they cooled down they were tight enough that they didn't need clamps for my application.
Fantastic Awesome Gadget
Works really Great. Fast installation and reliable "quick Disconnect" A total "Go - To" and get it. ...
Just what I needed.
One of the only 3/16" quick disconnects I could find. Most are 1/8" or 1/4". Easy purchasing process.
Quick Disconnects are great
Love these quick disconnects makes it super easy to switch my kegerator from commercial kegs to my home brew kegs.
Nice
Especially with fixed barb taps.
Looks good
Looks good. I really like it it looks really nice in my kitchen breakfast bar. I got it really fast it’s awesome love it
sorry, these are not for 3/16" ID Hose
These are quality pieces, but in no way are they for 3/16" ID tubing. Much too large. They are shown here with a real 3/16" barb, and a 3/16" ID / 1/4" OD tubing. You will never get the tubing on this fitting.
Works very well!
This glass is perfect for drinking absinthe! It measures the amount of absinthe for you. I bought the dripper that Kegworks sells. It sits on top and slowly drips for thevperfect louche every time! Great prices, fast shipping!
They are beautiful and sturdy, I like them a lot.
I was expecting Collins glasses, and these are much larger like Highball size. Other than that, I do like them. I only wish they would have been the smaller ones. I would recommend them if you're expecting Highball size and not Collins.
These are great for swapping between domestic and homebrew taps. I didn't notice any extra foam either so that was a plus. The quality seems kind of low as they're plastic but functionally they are just fine.
Not as described
They don’t fit 3/16 ID hose. I have a bunch of these the same size. I order 4 of these at I think $20 a piece + 2 day shipping due to the fact I needed them fast. That’s about $105 and not as advertised and I can’t use. Ah they will be sent back for a full refund. Not happy!
Great to use for multiple ways to dispense from my kegerator
Used this so I can change from a normal beer keg to a corny or brew keg.
A little pricey but they work like a charm
Installed these so that I can easily switch from ball lock connectors on corny kegs to sanke taps and they work great. They seem to be a bit expensive but they sure make switching from one keg tap style to another easy and fast.
Works perfect.
Makes swapping out keg couplers a breeze. I only use it on the air side and it works great