-
Tap two kegs at the same time and control the pressure to each of them individually!
This Two Product Two Pressure CO2 Regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable "shut down" blows off at 55-65 PSI.
The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.
-
- Tap two kegs at the same time and control the pressure to each
- 0-60 gauges measure pressure to each keg
- 0-2000 gauge measures CO2 in tank
- Has air shut off switch for each CO2 line
- High CO2 volumetric flow to insure continuity in product dispensing
- Bonnet material is glass-filled Polycarbonate
- 10 Micron filter built in to keep contaminants out of regulator
- Less prone to freeze up problems
- Approved by Pepsi and Coca-Cola
- Trusted Taprite Brand
-
- Material:Brass
- Keg PSI: 0-60
- Tank PSI: 0-2000
- Dimensions: 9"W x 7 1/2"H x 5 1/2"D
- Fittings: Brass Gas Tailpiece; Tank Connector: CGA 320
- Adjustment Mechanism: Polycarbonate Bonnet
- Shut off valves: Chrome Plated Brass
- 5/16" hose barb
-
Attention CA Residents:
Prop 65 Warning >
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
