Shank for Draft Beer System

You have your cooling unit, draft tower, and faucet tap all ready to go. Now you just need a beer shank to start dispensing tasty draft beverages.

The beer faucet shank is a threaded metal tube that connects the beer line inside of your refrigerator to the beer faucet in your bar. It is inserted through a hole drilled into the refrigerator wall or house wall.

Made of chrome-plated brass, beer shanks are sturdy, effective, and economical. Depending on how thick your refrigerator or wall is, you can order your shank between 2 and 14 inches long.

Each shank comes with a coupling nut, sleeve, snap ring, plastic flange, and flanged locknut. For your convenience, all shanks are shipped completely assembled. These shanks will fit on all North American faucets with 7/8-inch x 14 straight pipe thread. If you’re using equipment from outside North America, you’ll need to source a specialty shank.

Be sure to accurately measure your wall and beer setup to order the correct shank length. If you have a multi-tap draft system, you will need a shank for each faucet. To make it easier, you can save money by ordering these kegerator parts in bulk.

• Economical beer shank
• Made of chrome-plated brass
• Connects beer lines to faucet
• Is inserted through refrigerator or house wall
• Available in lengths between 2-14 inches
• Includes necessary hardware
• Comes full assembled
• Fit on North American faucets
• Bulk pricing available

• Dimensions: 2" - 14"L (select length below)
• Outside Diameter Dimensions: 7/8"
• Bore Dimensions: 1/4"
• Shank thread: 7/8"x 14 male straight pipe thread
• Material: Nickel or chrome-plated brass

• (1) Coupling nut
• (1) Sleeve
• (1) Snap ring
• (1) Plastic flange
• (1) Flanged lock nut