KegWorks - Tools for Drinking KegWorks - Tools for Drinking

You have no items in your shopping cart.

KegWorks - ITEM # C621

90° Tail Piece for 3/16" ID Vinyl Hose - Stainless Steel

Roll Over Image to Zoom

Click to View Larger

$4.79

  • Buy 25 for $3.99 each and save 17%

In stock and ready to ship.

Get more from your draft beer equipment! Supplies like this bent tail piece make it easy to optimize your system for maximum efficiency.


    Overview

    Keep your beer flowing flawlessly with this specialized stainless steel tail piece.

    Simply attach this piece to your shank or coupler for an approximate 90-degree bend that eliminates kinked hoses and beer lines. You’ll achieve a better, unhindered beer flow all the way from the keg to your tap. And because it's made from high-quality stainless steel it won't rust, corrode, or tamper with the flavor of your brew.

    Please Note: This angled tail piece attaches with a hex nut and rubber washer (both sold separately).

    Features
    • Made of stainless steel
    • Attaches to shanks or couplers for an approximate 90 bend
    • Avoids kinked beer lines
    • Fits 3/16" Beer and Air line

    Free Expert Support

     877.636.3673

    Contact Customer Care
    Specifications
    Specs
    • Nominal Outside Diameter: 3/16"
    • Actual Outside Diameter: 1/4"
    • Length: .429" from end to elbow; Barb length: .629"
    • Overall Height: 1 5/8"
    • Material: Stainless Steel
    WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
    Shipping & Delivery

    Related Products
    Customer Reviews
    There are no reviews for this item. Write Review
    Questions & Answers
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 4 questions Browse 4 questions and 28 answers
    Why did you choose this?
    Kegworks Store
    May need to redirect the hose.
    Robert Aarons E on Aug 12, 2018
    because some of the kegs I get are higher than most and don't fit well in the kegerator
    Normand G on Jun 4, 2018
    May need to redirect the hose.
    Robert Aarons E on Aug 12, 2018
    mainly price and quality of parts from kegworks.
    Richard F on Jun 27, 2018
    because some of the kegs I get are higher than most and don't fit well in the kegerator
    Normand G on Jun 4, 2018
    Need this tail piece for coupler in kegerator when using 1/2 barrels. Coupler is tight to the top inside of kegerator. This will prevent the vinyl tubing from kinking.
    Mark C on Mar 7, 2018
    Functionality in my Keezer
    Knox R on Jan 25, 2018
    I wanted a 90 coming off my tap to route the hoses in my keezer build, so the hoses don't hang over the top of the kegs. I hope these will work as planed.
    Robert B on Jan 4, 2018
    needed this to make all my lines fit
    Ed H on Aug 31, 2017
    Avoiding off favors for more acidic beverages.
    Michael T on Aug 12, 2017
    I replaced my tower, and it came with a straight fitting. The hose is getting crimped, restricting the flow of some fine ales.
    David B on Jun 3, 2017
    For my jockey box's beer inlet lines, so the lines will not get kink anymore which caused pouring issues
    Greg S on May 22, 2017
    I am putting faucets through the wall with not much space so needed a 90 degree.
    Bill W on Apr 16, 2017
    beer faucets through a shed wall. Beer lines come up from below and this will prevent the hoses from kinking.
    Brian W on Feb 15, 2017
    I have a dual tap kegerator and need these to use on full size European style kegs.
    Thank you for my rush order and will be looking for more bar equipment in the future.
    Robert L on Dec 13, 2016
    My keg is in a tight place.
    Ryan H on Nov 10, 2016
    better fit for top of barrel in beermister
    Peter M on Aug 29, 2016
    so the beer line doesn't kink against the tower wall..
    Scott N on Jul 29, 2016
    Stainless steel
    Heath C on May 20, 2016
    To keep my beer lines from kinking.
    Guest on Apr 6, 2016
    Needed for clearance at the top
    Michael C on Mar 26, 2016
    Needed it for new tower assembly and wanted the SS versions.
    Steve S on Feb 21, 2016
    There is not enough room in my fridge to allow the beer line to naturally curve so the hose kinks. Hopefully, this will solve the problem.
    William S on Dec 24, 2015
    Wanted an angled tailpiece instead of the straight one for more efficient flow and best clearance on the top of the keg coupler.
    Kev on Nov 24, 2015
    I chose SS tail piece to fit my kegging equipment. Also the SS won't corrode when placed in a chemical bucket like nickel or brass will.
    joshua L on Nov 4, 2015
    mainly price and quality of parts from kegworks.
    Richard F on Jun 27, 2018
    Need this tail piece for coupler in kegerator when using 1/2 barrels. Coupler is tight to the top inside of kegerator. This will prevent the vinyl tubing from kinking.
    Mark C on Mar 7, 2018
    How tall is this? I have minimal clearance above my adapter.
    A shopper on Apr 8, 2016
    BEST ANSWER: The overall height of this tailpiece is 1 5/8 inches. Cheers!
    Will this fit product code SS-SHANK? If so, what parts/kit would I need to join them?
    A shopper on Sep 10, 2016
    BEST ANSWER: Yes. Other things to consider, inner diameter of shank & fitting the same? Also you'll need a square cut o ring, nut, and hose/clamp for the fitting side if you didn't know. It will fit, Cheers!??
    Is a similar item available to fit a 5/16 size tube?
    Ryan E on Jan 1, 2017
    Recommended Products
    ×

    About Backorders

    This item is currently out of stock but we're expecting more soon.

    For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.

    Click here for additional shipping information.