KegWorks Homepage
-
This threaded fitting tap handle insert is a necessary component as you build your own custom tap handles. Made as a replacement part, this practical piece can also restore your damaged or stripped tap handle thread, so they connect like new.
Tap handles and beer knobs require specific threading to attach to the faucet and this fitting has it. Simply insert this piece into the inside of your tap handle to connect it to the faucet lever.
With the standard male outside threads and female inside threads, it’s an essential for crafting your own bar tap handles or for necessary repairs.
-
- Simply insert this piece into the inside of your tap handle to connect it to the faucet lever
- Restores your damaged or stripped faucet tap handles
- Necessary part for building your own custom tap handles
- Standard male outside threads and female inside threads
-
- 9/16" High
- 1/2" Outside Diameter
- 5/16" Inside Diamter
- Eternal thread size: 1/2 - 20 UNF (20 threads per inch)
- Female Threads are 3/8"-16 UNC
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Made custom hand blown glass tap handles with these threaded inserts. .
I haven't actually put these on a tap yet, but I made these hand blown glass tap handles using the parts I ordered. Thanks!
Great fitting
Exactly what it says it is. Good quality metal and nice threads.
A+++++
This product is perfect for a homemade designed Beer Tap handle.
Good Product, will buy again
I work at KegWorks and bought these fittings to make some simple tap handles on the lathe, and just drilled holes in the bottom and used some epoxy to glue the fittings in place. Very easy to use.
Great Threads!
I've tried a few different inserts, and find that these work quite well. I build custom tap handles out of solid maple and like that these thread in quite easily. They have a smaller outside diameter which means a smaller hole. You will need two different bits since there is quite a variation between the inserts in outside diameter. Also being from Canada, the price of getting them to my door is a little hard to swallow. First the exchange rate, and then the outrageous shipping charges. But for now, I will continue to use them.
thanks
thank you
Havent used these yet, but if you're going to make your own handles, these are a must have.
Would be better if had groves on ends for flat head screw driver to help screw into custom made handle. Had to use plyers being careful not to ruin threads.
Perfect for threaded holes
I chose this insert because I wanted to tap a threaded hole in my tap handle prior to installing the insert. Other inserts I've found are pressure fit into a drilled hole and could result in splitting of the handle. I found that a 29/64 hole tapped with a 1/2-20 NC tap is appropriate for this insert. A little epoxy on the threads makes this a permanent and very strong installation.
Beer
Works like a charm.
Product does not come with matching caps
The product is of good quality but does not come with matching caps.
Oosik tap handle
Worked perfectly on my 1000 year old walrus oosik.
Great product
This seal is high quality. It was better then the one that came on my growlers.
