2 Product CO2 Regulator - Polycarbonate Bonnet

Tap two kegs at the same time using one regulator and air tank. This unit includes our double gauge poly carbonate bonnet regulator with a “Y” fitting and two air shutoff valves, one for each keg it is attached to.

The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.

Rather than purchasing separate regulators and air tanks, just use this two-product CO2 tank regulator.

• Tap two kegs at the same time with the same pressure to each keg
• 0-60 gauge measure pressure to each keg
• 0-2000 gauge measures CO2 in tank
• Has air shut off switch for each CO2 line
• High CO2 volumetric flow to insure continuity in product dispensing
• Bonnet material is glass-filled polycarbonate
• 10 Micron filter built in to keep contaminants out of regulator
• Less prone to freeze up problems
• Approved by Pepsi and Coca-Cola