15 Liter Draft Beer Line Cleaning Keg - US Sankey

Description

Simply fill this cleaning bottle with cleaning solution, untap your keg and connect the bottle instead. Once your keg regulator is turned on, the cleaning solution will run through the beer lines the same way your beer would. Place a bucket under your beer faucet and the solution will flush out into the bucket. It’s a quick and easy way to clean your draft beer system considering your setup actually does the work for you.

This 15-Liter beer line cleaning system is used for larger, commercial draft beer systems. We also offer this same product in a 5-Liter size. Beer lines should be cleaned every time you switch over a new keg, or approximately every 2-3 weeks.

You will need a standard US Sankey “D” system coupler but chances are you already have one. That’s the coupler used to tap almost all U.S. domestic beers. If you're not sure whether you are using the Sankey system, check with our keg coupler list.

If you are using a system other than Sankey D, we offer cleaning bottle caps to match this unit to A, G, S, U, or M system couplers.

Note: The color of the base and handle may vary.

Features

Specifications

Includes

Attention CA Residents:  Prop 65 Warning >

Attention CA Residents: Prop 65 Warning

×

This product may contain a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Questions & Answers