-
Combination brackets are our most popular style of bar rail bracket because of their classic look and ease of installation. The weight on the bracket is distributed between the bar-mounted and floor supports to fully support your bar rail.
This combination bracket is made from stainless steel with a brushed finish, and will precisely match your Brushed Stainless Steel two-inch outside diameter bar rail tubing.
This bracket sits approximately 6" off the floor (measured from the floor to the center of the area for the tubing) and 6"-7" away from the facing of the bar. With two contact points, this double-footed bar rail bracket combines a sturdy build and a classy design. For proper support, bar brackets should be placed at each end of the tubing, plus one for every 4-foot increment.
Combination brackets are installed by mounting them to the facing of a bar while the foot of the bracket rests on the floor. They are a perfect solution for anyone that wants a bracket to rest on the floor without having to drill into the surface.
For help deciding which bracket will work best for your bar project, check out our bar foot rail brackets guide for more information on each of the options.
Installation instructions:
- Measure & mark holes for mounting screws.
- Attach brackets to the face of the bar with mounting screws.
- Secure tubing to bracket by fastening set screws through hole in the bottom of the bracket.
For more detailed instructions on how to install bar rail read our guide to planning & installing
Care & Maintenance:
Care and maintenance of bar foot rail varies by finish. Given the nature of the product, typical wear and tear may be noticed with your bar rail over time, such as scuffs, scratches and dirt. Our guide to cleaning & maintenance on how to properly prep, clean & maintain all bar rail finishes.
-
- Made of stainless steel with brushed finish
- For use with 2" Outside Diameter bar rail tubing
- Bracket arm mounts to the face of bar while foot rests on the floor
- Brackets should be used at both ends of rail tubing, plus one at every 4' increment
- Mounting & self-drilling screws included
- Suitable for indoor use only (Clearcoat protection available by request)
-
- Bracket Width: 7.25”
- Bracket Height: 7.10”
- Opening Diameter: 2.01” (for 2” OD tubing)
- Wall to Center of Tubing (Horizontal Center Point): 6.13”
- Floor to Center of Tubing (Vertical Center Point): 5.99”
-
- (2) #10 1-1/2" Mounting Screws
- (1) #8 3/4" Self-Drilling Set Screw
- Download Spec Sheet
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Very nice foot rail
Just as advertised, good quality and easy to install
Looks great !
Looks great !
Foot rail
I ordered this not realizing it was two pieces. At the length I needed one piece was the way to go. These guys made the swap so easy. Not to mention the rail is beautiful! Thanks for making a stressful time less so. Added a few pictures of the final product.
Great product!
I really like my foot rail. Looks great and the delivery time was really fast.
Looks fantastic
Great design, weight is transferred to floor outstanding distribution.
Custom and amazing
I could not be any happier with the foot rail by Keg Works. We had a custom piece of stainless steel cut to size by a local metal fabricator to fit behind the rail. The foot rail was easy to order and install. We have had many compliments on the finished product!!
Combination Foot Bracket
The brackets are high quality and easy to install. I'm a professional remodeling contractor that specializes in basement bars and I always purchase my foot rail materials from KegWorks.
Outstanding
It’s beautiful! Makes sitting at the breakfast bar so much more comfortable
Well made!
Like the product. Did not receive the right bolts for brackets to stabilize the footbar
False B
Hard not to give a 5 when you get what you expected!
This rail was the finishing touch to our bar. Very good quality.
It is as advertised; I'd buy again if I had a need
Like the look, install was straight forward, and price OK (not great).
Brushed Stainless Steel Foot Rail
Great bar rail. Only reason I didn't give it 5 stars was I could not get the screws that hold the bar to the bracket installed! I couldn't drill through the stainless steel. Otherwise very easy to install (I did need cut a circle in my baseboard to accommodate the wall ******)
The brushed stainless steel is very nice and looks terrific . I don’t understand why there is not a threaded set screw( instead of a self-tapping) . It’s very difficult to install it ( you have to drill a hole first and have a right angle drill to clear the bracket . Also , why don’t the end caps have an internal spring loaded button to grab onto the inside of the tube - instead of wrapping it with Teflon tape?
Perfect for outdoor kitchen
I ordered the Foot Rail Brackets for my outdoor kitchen and was not disappointed ! The shipment was fast, the material was great quality and they fit perfect to my new kitchen.Thank you Kegworks!
Professional, high quality.
High quality stainless steel. I ordered three brackets. They are all the same size and angles. I did not have any problems with the anchor screws because I read the other reviews and started the anchor screws before installing the brackets and tightened by hand after putting the rail in. My home bar looks official after installing these classy, modern brackets.
Really nice looking and sturdy bracket.
Stylish Step-Up Footrail
Ordered a footrall for our in home bar. It came with 3 of these mounting brackets. We wanted our 3 stools to be evenly spaced along length of bar while pushed under overhang. Sturdy enough without 4th bracket, just a personal choice. Looks great, expedient service, quality material. Would order from KegWorks without hesitation.
Fit my 2 in. Foot rail perfect.
