KegWorks Homepage
-
This handy flush angle fitting is a simple and cost-efficient alternative to miters or custom bends that will perform the trick of helping your bar foot rail turn a 135º corner with ease.
Featuring stainless steel construction with a brushed steel finish to match your bar rail tubing, this flush angle fitting is easy to install as you're completing a DIY bar foot rail project. Simply slide a piece of two-inch outside diameter tubing into either end and easily manage an oblique angle as you complete your installation.
To ensure sturdy foot rail, remember to support the rail with bar foot rail brackets every four feet for the duration of its length.
-
- Made of brushed 304 Stainless Steel
- Allows your bar rail cover a 135º angle without costly custom bends or miters
- Insert 2" OD bar rail tubing into either side
- Tubing slides in easily and is held securely
- Angle fitting slides into your tubing for a flush look
- Suitable for indoor use only
-
- For 2" Outside Diameter tubes
- Download Spec Sheet
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Beautiful Flush Angle Fitting 135(45) Degree - Brushed Stainless Steel - 2" OD
This Flush Angle Fitting 135(45) Degree - Brushed Stainless Steel - 2" OD fit perfect and works beautifully on my kitchen bar foot rail. Good quality product. Fast shipping (would have appreciated a little less in shipping cost but shipping costs have gone up with everything).Perfect for my needs.
Created a Classic Look for My Home Bar
Needed to make the transition around the corner of my bar and these Flush Angel Fittings 135(45) Degree - Brushed Stainless Steel couplings were exactly what worked to make the bar rail work with the corner and emulate the adjusted bar top. Created a classic look for my home bar.
The only complaint is that there are no installation instructions. The pieces just fit together and so I used clear silicone as an adhesive to keep things from moving apart.
