Leland CO2 Picnic Tap
Roll Over Image to Zoom
$279.99
In stock and ready to ship.
With the Leland CO2 PicnicTap™, you can pour your favorite beverage using CO2 as the propellant, instead of pumping like you would with most keg pump taps.
- Overview
-
With the Leland CO2 PicnicTap™, leave pumping in the past at your next party!
Just attach your PicnicTap™ to the keg and install a Leland CO2 cartridge. Two cartridges are included with this set. It uses patented TapGas™ (99.97% pure, beverage quality CO2) to offer you a true pump-free dispensing solution.
You can even set the pressure and control the foamy head of your favorite beer naturally, exactly how the brewery intended! Just remember that it takes one cartridge to dispense a 1/4 keg and two for a 1/2 barrel.
It's time to find a new bicep workout because with the Leland CO2 PicnicTap™ you'll never again waste precious party time at the party keg. The act of the beer keg pump will be extinct.
*Please note: The PicnicTap™ comes standard with a US Sankey keg coupler, but it will accommodate a European Sankey, Hoff Stevens, and German keg couplers.*
Features
- No air pumping required
- Automatic regulator
- Zipper sleeve on tap helps keep it cool
- Easy operation, no tools required
- Beverage stays fresh
- Use with beer or soda, indoors or outside
- Gauge readings in PSI
- Specifications
-
Specs
- Dimensions: 26"L
- Weight: 8 lb when fully assembled
- Gas Inlet: 5/8"-18unf1A Inlet
- Pressure Rating: 1800 PSI
- Rupture Disc Release Pressure: 7,000 PSI
- Max Outlet Pressure: 22 PSI
Includes
- (1) PicnicTap with zipper sleeve
- (1) US Sankey coupler
- (2) TapGas CO2 cylinders
WARNING: This product contains a chemical(s) which is known to the state of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. - Shipping & Delivery
-
Related Products
- Customer Reviews
- 4.5 / 5.02 ReviewsQuality5.0 / 5Value4.0 / 5Would you recommend this product?Yes! I would recommend this product. (2)Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value5 / 5Uses it for the first time yesterday. Easy setup and use!
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Would you recommend this product?Yes! I would recommend this product.Quality5 / 5Value3 / 5Good portable CO2 tapIt was very easy to setup, adjust and use. I had it on a 1/6 barrel and it put the faucet at a good height. Cleaning is easy, but requires a deep sink. One tank of CO2 lasted for the entire 1/6 barrel, but I'm not sure there was enough CO2 left to do another. The only downside was that people really like to play with the regulator, and I would often find it all the way open. It would take a couple of beers to get it pouring correctly again.- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Questions & Answers
- Start typing your question and we'll check if it was already asked and answered. Learn MoreBrowse 6 questions Browse 6 questions and 13 answersWhy did you choose this?Kegworks StoreWorks Great. Easy. Portable.Clifford H on Jul 23, 2020Our event management company already owns one and it's so convenient to take to events that we bought a second. It makes it so easy for our volunteers to set up and pour the beer for our participants.Michelle D on Feb 3, 2018Works Great. Easy. Portable.Clifford H on Jul 23, 2020This is a very convenient piece of equipment for portable beer drafting.Ethan B on Jun 12, 2018Is there a way to adapt a regular CO2 bottle and skip the Little cartridges?BEST ANSWER: I think it would be difficult at best. To find or fabricate adapters to size up from the small diameter to larger would be a challenge. I would recommend going w the standard portable with standard co2, its cheaper anyway. I have both, happy I do, it's all about the beer!
- Reply
- Inaccurate
- Lonn F on Jan 16, 2017
- Purchased on Oct 2, 2015
Can the faucet be replaced with a flow control tap faucet?BEST ANSWER: I use these and you certainly could put a flow control faucet on it.- Reply
- Inaccurate
- Kevin B on Jun 8, 2018
- Purchased on Nov 14, 2016
Tap for a watermelon ? What kind ?BEST ANSWER: Hi Joyce,
What you're looking for is our Watermelon Tap kit. See below for the two styles that we carry. One is made of plastic and the other is our deluxe version made from metal components. They both work great!
Cheers!- Reply
- Inaccurate
- Vicky S Staff on May 30, 2016
Can these taps be used for kegged cocktails?BEST ANSWER: We would not recommend using this to dispense cocktails. Mainly because the contact material is not 100% stainless and the acidity in cocktails will likely corrode the chrome-plated brass. Also, the type of gas to use depends on if you're serving carbonated or still cocktails. Check out our Cocktail on Tap page for additional information about dispensing kegged cocktails.
https://www.kegworks.com/commercial-sales/cocktails-on-tap- Reply
- Inaccurate
- Vicky S Staff on Sep 11, 2017
I have a corny keg with ball lock and I want to use this tap (I already have one)...what kind of adapter is needed? -
If You Like This, You May Also Like
About Backorders
This item is currently out of stock but we're expecting more soon.
For an estimated ship date, please contact Customer Care at 877.636.3673 or email customercare@kegworks.com.
