KegWorks Homepage
Part #: UBENDXXX
U Bend for 3/8" ID Vinyl Hose - Stainless Steel
Experiencing a sharp angle as you set up your draft beer system? This U-Bend connector for 3/8" inner diameter tubing allows you to cover a 90-degree turn in your draft beer lines.
- Need Help? Chat Now
- Simple Returns Learn More about returns
-
This draft beer system connector allows you to attach two draft beer lines that need to cover a 90-degree turn with this handy U Bend connector.
Made of premium stainless steel that won't rust, corrode, or taint the flavor of your brew, this connector is specially designed to fit 3/8-inch inside diameter beer line.
To use it, simply slip a section of beer line tubing over each barb and then secure with a screw clamp or tab clamp.
-
- Made of stainless steel
- Connects two beer lines that need to cover a 90-degree turn
-
- Fits 5/16" or 3/8" inside diameter draft hoses
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Just what I needed.
Nice match to the footrails we had
Not it's intended purpose but perfect
Perfect units and only place I could find such a thing. Using them on a motorcycle to plumb an oil cooler. These were absolutely perfect for the application and should should up to the oil and heat just fine. For a motor to drink not a human, by it's still provides refreshing oil to a hot thirsty 500cc monster. Thank you!
Keg parts as car parts lol
I scoured the internets on a 3/8 180 bend to put on the passenger side of my LS swapped vehicle for the fresh air side of the pcv system. I need to run it back towards the firewall for a dual catch can. Funny thing is that i only found this one at a keg place. Atleast i know it wont rust lol. Thanks
Just what I needed
Worked perfect
U bend
It was on time great product great customer service. I couldn't ask for anything more.
U bend
It was on time great product great customer service. I couldn't ask for anything more.
Worked great and was delivered very quickly.
Quality piece, not flimsy, no burrs whatsoever.
Great for motorcycle oil coolers
Worked perfect for adding an oil cooler to my Harley. A pair of these allowed me to route the cooling lines without kinking the hoses. Thank you!
Great connection
Perfect for my requirements. Thanks
Great product. Works in automotive applications as well
Great product. Exactly what I needed to install the catch can on my 2005 Mini.
U bends are perfect
Perfect. Keeps lines from crimping and shunting flow.
Power Steering Return Hose
I used this to get rid of the kink that was in my power steering return hose. I was going to go have a longer hose made and run it past the oil pan and then back to the power steering pump and then I found this online. It worked great. I bought the .75" radius and the 1.125" radius. I like the 1.125" better.
Great fit
Specialized part
Works great! It is the only 3/8” ID U bend I could find. I needed it for a specialized application for flowing water and plant nutrients in a confined space for a hydroponic growing chamber for the NASA competition of “Growing Beyond Earth”. KegWorks customer service was great to work with.
Great product.
Great U bend. Just What I needed.
Good stuff
Good quality material.
worked perfectly
I bought 3 of them, they worked great!
Auto trans line cooler installation
I used the U bend for 3/8” ID hose for an auto trans cooler and it worked perfect to reverse the direction of the hose.
