KegWorks Homepage
-
This Taprite High Performance Double Gauge CO2 Regulator is designed to handle the high flow of gas required for commercial draft systems with multiple kegs.
The polycarbonate construction of this quality beer regulator allows it to resist corrosion in wet environments while offering lightweight strength that could never be matched by zinc. Keep track of and adjust pressure levels easily with this part.
A short stem and high flow outlet valve can push through CO2 without freezing the gauge mechanism, so you can safely make this your primary option to power secondary regulators, distribution bars, and other multi-product installations. It’s even fully approved by Pepsi and Coca-Cola for use in your fountain soda setup!
If you’re looking for a dual gauge keg regulator that you can trust, Taprite has you covered!
-
- Bonnet material is glass-filled polycarbonate
- 0-60 PSI keg pressure gauge
- 0-2000 PSI tank pressure gauge
- Air shut off switch for CO2 line
- High CO2 volumetric flow to insure continuity in product dispensing
- 10 Micron filter built in to keep contaminants out of regulator
- Less prone to freeze up problems
- High performance 5/16" barb with duck-bill check valve
- Shortened tank stem for higher gas flow
- Red bonnet
- Approved by Pepsi and Coca-Cola
- Trusted Taprite Brand
-
- Material:Brass
- Keg PSI: 0-60
- Tank PSI: 0-2000
- Dimensions: 7"W x 7 1/2"H x 5"D
- Fittings: Brass Gas Tailpiece; Tank Connector: CGA 320
- Adjustment Mechanism: Polycarbonate Bonnet
- Shut off valves: Chrome Plated Brass
- 5/16" hose barb
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Replaced existing regulator
Easy installation and well built unit. Works as expected.
Dual gauge regulator
Easy install, and beer pours much better over the stock regulator.
Reliable product and great customer service! Thank you!
CO2 Regulator
Here is the new regulator in action, along with the new gas line, coupler, 90-degree elbow, and end product. My old regulator would creep (which is why I got this new one) and if you look closely you'll see the pressure is set to just below 6 psi. The pressure does build up a bit overnight but the keg does not over-pressurize like it did with my old regulator. I need the 90-degree elbow to put a half-keg into my kegerator, and I'm running a quarter-keg to "get all the kinks out" before I get a half-keg.
Works great! I would definitely recommend!
Very good
Perfect for my set up. Thanks
Seams to be a good regulator
Appears to be a quality regulator. I haven’t been able to utilize it much yet. My keg ran dry right after I installed it and haven’t picked up a new one yet.
Works as advertised
Works great, completely functional, good workmanship.Built for function, not for looks.
Purchased as a first time buyer. It’s ok. It is not as dialed in as I expected it to be. You can turn it for a while and no change in pressure then one more turn and the pressure is gone. So you go back the other way and you’re at 20. You need to turn and let it sit for a while to dial it in.
Works awesome...
Great Product
Regulator arrived on time, solid product and easy to adjust pressure.
Great regulator
Best upgrade to my kegorator! The one that came with my kegorator wouldn’t keep the pressure and would gradually increase if you didn’t pour a beer for a while. This one keeps its pressure and the way to adjust the co2 is simple and requires no tools.
Quick Service, came as described!
Satisfied
Quality regulator, love the knob adjustment!
Love it!
Great craftsmanship, sleek design, easy to use, and it doesn't leak!
one option
It only had 5/16" barb I needed 1/4"
Defective CO2 Regulator
I purchased a CO2 Regulator and it is defective. It has a leak. I checked everything else and it's the new CO2 Regulator. Very disappointed.Please respond at your earliest convenience.Thank you
Something lacking.
We haven't used it yet,but it doesnt look like glogg fruit we have used in the past. Missing apricots cardamom. Just doesnt look the same.
Great quality product
I was unaware that a new CO2 Regulator could and did make the beer taste so much better, i guess my old one was bad and didn't even know it. I don't know if there's a way to check them, but i would for sure replace it if your beer is starting to taste a little strange. Josh
Excellent!
Have been using this regulator for just one week and, so far, it is excellent. Love the rubber o-ring on the connection to gas tank--eliminates need for paper washers, and the pressure adjustment knob beats the heck out of the older slotted-head pressure adjustment screws. Works GREAT! I would definitely recommend this regulator to others!