KegWorks Homepage
- Greatly reduce the amount of beer your kegerator wastes due to foamy pours with this handy Draft Beer Tower Cooler.
The goal of an efficient kegerator or draft beer system is to maintain the temperature of the beer as it travels from keg to tap. Beer can get warm if it sits in the draft tower for an extended period of time. This leads to foamy pours when you open the faucet for the first time. The Draft Beer Tower Cooler helps the beer maintain its temperature by sending chilled air from your refrigerator up to the draft tower so it stays chilled as it sits in the tower.
The fan box unit for the tower cooler sits right inside your fridge or kegerator while taking up minimal space. It gets its power from the included 12V power pack which plugs into any outlet. The attached flexible hose easily runs up to your draft tower where it delivers the chilled air the fans send to your draft tower.
Adding the Draft Beer Tower Cooler to your kegerator will save you time and money. Learn how easy it is to install the Draft Beer Tower Cooler. -
- Keeps your beer at the perfect temperature all the way through the kegerator tower
- Eliminates foam in beer
- Blower sits inside kegerator fridge.
- Unit and hose small enough to easily fit inside fridge and draft tower
-
- 3/8" I.D Tubing
- 34CFM Fan
-
- Fan box
- 12V power pack
- Flexible tube
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
It’s amazing
It does the job, it makes my beer taste amazing
Supplemental cooling device
So far so good seems to help cool the column in our outside kegerators.
Beer tower cooler
Keeps my tower nice and cool, no need to drill any holes. Cord is small enough to go through the door seam.
loud
It's a little bigger than I had imagined from looking at the pics but it still fits in my setup just fine. Does what it's supposed to do well enough but it's surprisingly loud. Certainly not too loud if your kegerator is in a commercial environment but mine is in a corner of our living room. The constant 'hum' is annoying. Will probably have to take it out and come up with another solution. Also, the cord is short enough, most people are going to need an extension cord.