-
Tap two kegs at the same time and control the pressure to each of them individually!
This Two Product Two Pressure CO2 Regulator has two separate gauges to uniquely measure the pressure to each keg and allow you to adjust it particularly for the type of beer or beverage you are drinking. A third gauge tells you the amount of CO2 left in your tank. Regulator attaches directly to CO2 tank and has an air shut off switch for each CO2 line. Nonadjustable "shut down" blows off at 55-65 PSI.
The polycarbonate bonnet is lighter weight and stronger than zinc bonnet regulators and it will not corrode in wet environments. No special tools are required to raise or lower the CO2 pressure. The cap knob simply pulls out so it can be turned to adjust pressure up or down then pushes back in to lock in pressure.
-
- Tap two kegs at the same time and control the pressure to each
- 0-60 gauges measure pressure to each keg
- 0-2000 gauge measures CO2 in tank
- Has air shut off switch for each CO2 line
- High CO2 volumetric flow to insure continuity in product dispensing
- Bonnet material is glass-filled Polycarbonate
- 10 Micron filter built in to keep contaminants out of regulator
- Less prone to freeze up problems
- Approved by Pepsi and Coca-Cola
- Trusted Taprite Brand
-
- Material:Brass
- Keg PSI: 0-60
- Tank PSI: 0-2000
- Dimensions: 9"W x 7 1/2"H x 5 1/2"D
- Fittings: Brass Gas Tailpiece; Tank Connector: CGA 320
- Adjustment Mechanism: Polycarbonate Bonnet
- Shut off valves: Chrome Plated Brass
- 5/16" hose barb
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
It leaks co2 at every joint. Have to hire handyman to fix.
Works perfect
Works great.
Great product.
Only way to go with two completely different styles of beer.
Working well - precise adjustments to the pressures for each keg and the refill gauge are very nice. Very good quality and easy to operate. I’m very pleased.
replaced an older single valve regulator that seemed to have failed; causing me co2 issues. Replaced it with this new dual one and I'm good to go with two sixtels. Wish they made a 3-way. But this works great and is great quality.
Awesome!
Works Great!
Nuts not tightened
Works fine but one of the connecting hoses that I bought wasn't tightened properly when assembled. Overnight all my co2 was gone. Good equipment otherwise.
Well built; fits perfectly
I replaced an older version with this one due to the tank dial being bent (I dropped the regulator). This fit perfectly, works well, and feels like it will last quite a long time.
Perfect Regulator
This 2 pressure regulator works great! Easy to adjust pressure and read. I have beer set at 12 psi on one and Carbonated water set on the other at 20 psi. It is a little bulky but still fits in My kegerator with the CO2 and two 1/6 barrel kegs.
Easy to use
Simple, easy to use. I like that the pressure knobs lock in place. This unit can easily accept more regulators as my system grows.
Got this regulator at the recommendation of the folks at Kegworks and couldn't be happier.
Works great, only thing that is a negitive is the high pressure outlet and inlet on both regulators have left hand threads. I needed to install an elbow between the regulators and cannot because can not find any left hand fittings. I worked in natural gas industry for 47 years and have never seen left hand threads on a regulator. Contacted manufacturer and they did not have any left hand fittings
Perfect for dual kegrators
This regulator is heavy duty and makes running two kegs much easier than split regulators
It seems to work well. The foam is at an acceptable level since I installed this new regulator.....
Great!
Found this online, shipped very quickly, great product.
nicely made simple coat hook
good, cheap, fast! thnx
I can finally have two beers on tap, and this double outlet regulator is precise!
Gauges aren't accurate
One of the tanks gauge will not reset to zero (or even close).
Beautiful Thing
Nothing in Aus as good as this..unless of course you get it made for you. Only thing was I had to change the nut to bottle, ours here larger size. Anyway gases and pours accurately pressure wise. A very good unit. Thanks America.
