KegWorks Homepage
-
This kit is a simple way to run two beer lines off an existing regulator.
The kit contains an air "Y" with two shut off switches for your keg regulator, allowing two beer lines to flow through simultaneously. It also includes two sets of air line jumpers with screw clamps. The air "Y" screws onto your existing CO2 tank regulator..
Since each line will have its own shut off, you can either run one or two beers at a time. Double your number of draft offerings with this valuable part.
-
- Food grade vinyl tubing
- Shut off each line individually
-
- Material:Brass
- Fittings: Brass Gas Tailpiece; Threaded end fits into regulator body
- Shut off valves: Metal
-
- (1) Air "Y" with shut off switches
- (2) 5’ air line jumpers with screw clamps
-
Attention CA Residents:
Prop 65 Warning >
You Might Also Like
The KegWorks Difference We're Your Favorite Drinking Buddy
Entertain & Inspire
We believe in creating and sharing good beverages. And having a damn good time doing it.
Educate & Inform
From troublshooting draft systems to crafting the perfect cocktail. We've got you covered.
Unique Product Selection
Your one-stop shop for the unique bar products you just have to have.
Exceed Expectations
Here to help. We aim to be the go-to source for all drink enthusiasts.
Customer Reviews
- Reviews
- Questions
Worked great, 1st time.
Worked just as described. The threads came with plumbers tape already, so there were no leaks.
Love it!
Love it!
Solid product
USDoes not fit. $14.00 to ship back.
Read product description carefully
This is what I needed, to hook up two kegs. It is nice that hose clamps were used instead of those cheap clamps that you have to break to remove. (Re: Picnic tap lines that I bought) The equipment is good quality but don't understand why when I ordered connectors for the Cornelius kegs they came in two different hose sizes, forcing me to remove one from an older line that I had. -5/16" ID - I assumed this was standard for your co2 pressure lines. Just venting where I have the chance.
I was pleasantly surprised that it came with hoses and they were already attached.
USIt did look exactly like this. However I am looking to connect it to a single co2 line from the regulator and not the regulator itself. The problem is that the threaded post will not fit inside the airline. I need an adapter to thread onto the post with a tapered barbed end on the opposite side that will allow me to attach this to the single co2 line.
Leaked at both output ports where they connect to the main body.
USQuality is 100%
Nice bucket but it leaks
Mine arrived packed nice with no damage. During the first use it appears to leak around the spigot. It is tight, I checked that. I guess I will try some sealer around the inside and outside to get it to stop.
Pub sign
Very attractive and personalized bar sign. Looks great behind my bar!
Y adapter splitter
It worked great after I lost $15 worth of co2 due to the fact that there wasn't enough fitting take applied to either thread, so the tank leaked out. I sprayed all joints with soapy water, once the lines were recharged with a new tank, and realized both threaded joints were leaking profusely. I unassembled and applied more thread tape, it works great now, but what a hassle and extra expense!